RFQ Electric Floor Crane 2T from singapore

Keyword:Electric Floor Crane 2T   Time:2020-10-14 13:32:22

Customer: We are souring for this type of portable crane (pls check below downloads) for an existing project.  Please send product catalogue and quotation for our consideration.

Please submit your proposal before next Tuesday 29th Sept 2020.

Model No : HB2000GKB19FaPo  (or propose compatible crane)

Capacity : 2 Tons

Lifting Height : Maximum Possible Lift by the Model with 2 Ton capacity. Our Minimum requirement is 3m

Lifting and lowering: Electrically operated hydraulic Jacking.

Steering : Manual

ELECTRIC CRANES 2T with counterweight.jpg

DOWNLOADS

Elektrobull_Datenblatt_SF_HB2000GKB19FaPo_GB.PDF

RAMHOIST: it is 3700 USD

pls check the link of this one: http://www.ramhoist.com/Cranes-Components2/1883.html

Customer: May I confirm that the model quoted is for “Electric Floor Crane Model - EFC027”?

Also, is it possible to use the incoterms Singapore (DAP Singapore Project site)?

RAMHOIST:  yes, we can use DAP term, may i know your project site address?

Customer: Below is our project site address.

C22B Site Office Address:

10 Changi East Close, *** Plant

Singapore 498785

 

May I confirm with you that the model quoted is for the Electric Floor Crane Model - EFC027 as shown in the link below?

http://www.ramhoist.com/cranes-components/Electricfloorcranes.html

In the Link provided , we cannot see that maximum tonnage ( 2 Tons ) and corresponding lifting height is reflected in the loading chart. It shows < 1000 Kg in the initial position itself.

Also , We are interested in having electric wire rope option like the below picture instead of fixed chain hoist.

Can you Please look at the above and send us the correct details to assess your quote and proceed further.

interested in having electric wire rope option.jpg

RAMHOIST: confirm it is in the link you sent.

the previous attachement (with just hook to hung in the jib) you send to me
just hook to hung in the jib
or our normal type (with just hook to hung in the jib)
with just hook to hung in the jib
or in the link (it is through a section of chain since the hook can not lift the goods if it is not assistant with the chain)
it is through a section of chain since the hook can not lift the goods if it is not assistant with the chain
you can see all the hook can not move and is dead, and you see below:
the hook is movable, it need add pulley block and motor
the hook is movable, it need add pulley block and motor, the price will be much higher.

for this crane, the jib is telescopic (extendable), when it is extented to max length, the lifting weight is 1T, when it is in min. length, the lifting height is 2T
will send your the DAP cost later

RAMHOIST: DAP Singapore Project site: 900 USD

so the total price: 3700+900=4600 USD

Customer: Please see our Reply.

movable hook for electric floor crane need extra money

the hook is movable, it need add pulley block and motor, the price will be much higher.

Okay. Noted.  Can you provide additional price for this option.

 

for this crane, the jib is telescopic (extendable), when it is extented to max length (how much is the maximum length in meters and what will be its height from floor?), the lifting weight is 1T, when it is in min. length, the lifting height ( weight or height? ) is 2T ( how much is the minimum length in meters and what will be its height from floor?) Please send us the loading chart that indicates these details for 2T.

RAMHOIST:

max. length 2m with lifting height 2.5m

min. length 1.2m with lifting height 2m

need 300USD extra for your movable hook

Customer:Thanks. Noted your Reply. We are interested in your product. Kindly note that this is a confirm purchase.

Please submit to us below document to evaluate and submission to client for Vendor Approval and Product approval.

  1. Commercial Proposal

  2. Company Profile

  3. Product Brochure

  4. Description of the Selected Model of the Crane

  5. Project / Supply reference

  6. Clause to clause compliance statement on G4.3 general specification attached.

  7. Local Contact details for after sales service

  8. GA Drg

  9. Datasheet

  10. Loading Chart

  11. ITP

  12. FAT procedure

  13. Confirmation to get the Product registered Under MOM and obtain necessary certificates.

In continuation to the trailing mail , Can you Please make the Maximum lifting height as 3 m. Its Okay if there is going to be reduction in the Load carrying capacity. Please let us know How much it can Lift suppose it can be made to Lift at 3 m height.

RAMHOIST:

yes, we can make the maximum lifting height as 3m, below is the drawing, it is about 800KG when it lift to 3m height.

max. lifting weight 2000KG   main jib 1.8m  second jib 1m, lifting height 3m,  power 3kw, lifting electric and hydraulic, steering manual  wheel PE.jpg

electric floor crane 2T 3m.jpg

  1. Commercial Proposal

  2. Company Profile         http://www.ramhoist.com/about/

  3. Product Brochure       http://www.ramhoist.com/upfile/201810/2018102367460625.pdf

  4. Description of the Selected Model of the Crane     max. lifting weight 2000KG   main jib: 1.8m  second jib: 1m, lifting height 3m,  power: 3kw, lifting: electric and hydraulic, steering: manual  wheel: PE

  5. Project / Supply reference     Jenmon International Pte Ltd,  Dejan AG, DELCO Maldives Pvt Ltd, Antares Group Ltd 

  6. Clause to clause compliance statement on G4.3 general specification attached.

  7. Local Contact details for after sales service   n/a

  8. GA Drg

  9. Datasheet

  10. Loading Chart

  11. ITP

  12. FAT procedure

  13. Confirmation to get the Product registered Under MOM and obtain necessary certificates.   yes

Customer: 

We did not get your confirmation on these requirements also, the main jib height 1.8 m is not sufficient for our requirement.

  1. Clause to clause compliance statement on G4.3 general specification attached.

  2. Local Contact details for after sales service   n/a

  3. GA Drg

  4. Datasheet

  5. Loading Chart

  6. ITP

  7. FAT procedure

RAMHOSIT:

the main jib length (not the height, the height is 3m) 1.8m is designed based on your max. lifting weight 2T, of course we can make to your request jib length if you need longer.

  1. Clause to clause compliance statement on G4.3 general specification attached.  yes

  2. Local Contact details for after sales service   n/a

  3. GA Drg    attached

  4. Datasheet   max. lifting weight 2000KG   main jib: 1.8m  second jib: 1m, lifting height 3m,  power: 3kw, lifting: electric and hydraulic, steering: manual  wheel: PE

  5. Loading Chart    2000*1500*1700  (L*W*H, unit: mm)

  6. ITP  i don't know what's this mean

  7. FAT procedure   of course, every unit we produced is tested ok and sign before delivery, you can also despatch SGS guy to test, no problem for quality at all

Customer: 

We have noted your reply , “ we can make the maximum lifting height as 3m, attached drawing, it is about 800KG when it lift to 3m height. “

You also have said that you need 300USD extra for your movable hook, Please provide more details about the Movable Hook.

 

Can you also submit the Complete GA Drg when the jib is fully extended and fully raised and mark the height of the hook from floor level ? This is not clear in the link you have shared with us.

Loading chart also not clear in the link shared with us. We want atleast 1200 Kg as loading capacity when the jib is fully extended and raised

ITP is Inspection test Protocal. It is also said as QAP ( Quality Assurance plan ) this will be listing all the applicable tests , its passing criteria , reference documents, review and hold points, etc.

FAT procedure you have to submit. This will have complete procedure of all the tests listed in ITP.

You have to identify the local after sales service contact agency who is also capable of getting the MOM certification. If you cannot do this , HSL will do it on behalf of you.

Please send us the complete operation and maintenance manual with spare parts list.

Please send us the technical specification of the offered model.

RAMHOSIT: 

You also have said that you need 300USD extra for your movable hook, Please provide more details about the Movable Hook.

 different hook for electric floor crane.jpg

we will use 2000kg hook above plus pulley block and winch motor (3KW in power supply 380V)

Can you also submit the Complete GA Drg when the jib is fully extended and fully raised and mark the height of the hook from floor level ? This is not clear in the link you have shared with us.

3m

Loading chart also not clear in the link shared with us. We want atleast 1200 Kg as loading capacity when the jib is fully extended and raised

when the jib is fully extended (with 2.8m jib lenght and 3m lifting height), the lifting weight is 800KG, when the jib is in the shorest length 1.8m, it can lift 2T, the jib is telescopic, you can adjust its length by lifting differet weight from 800KG to 2000KG

several holes in the jib for adjusting the jib length to lift different weight.png

you see the photo above you sent me before, there are several holes in the jib, it is for adjusting the jib length.

ITP is Inspection test Protocal. It is also said as QAP ( Quality Assurance plan ) this will be listing all the applicable tests , its passing criteria , reference documents, review and hold points, etc.

FAT procedure you have to submit. This will have complete procedure of all the tests listed in ITP.

we don't have this, we only have test report, or you dispatch guys to inspect before delivery.

You have to identify the local after sales service contact agency who is also capable of getting the MOM certification. If you cannot do this , HSL will do it on behalf of you.

your suggestion is accecpable.

Please send us the complete operation and maintenance manual with spare parts list.

Please send us the technical specification of the offered model.

it is a customized product and do not have this now, only have when we have order with you, thanks