3 Phase Single Speed CD1 Type 5 Ton Widely Used Electric Wire Rope Hoist Fixed Type and Trolley Type for Sale

Keyword:Electric Wire Rope Hoist Fixed Type   Time:2019-2-26 8:34:55

Wire Rope Electric Hoist (CD or MD) are widely used and very popular among user because of their characteristics of tight structure, smart body, safety and  reliability, common-used parts, well changeable property, strong lifting  capacity as well as convenient maintenance.The Electric Wire Rope Hoist exist in form of stationary Style and crab-style. The former is divided into four styles that is, A1, A2, A3, and A4 according to the position (up, down, left, and right) of the fixed trestle. It can be installed directly on the frame. The latter with movable function can be installed on the track. CD1 model lifts with single speed, and MD1 model not only with usual speed but also with low speed.

CD1/MD1 Electric Wire Rope Hoists10-1.jpg

 On such a basis, CD1 (GD), MD1 (GDS) and WH164 20t, 32t are developed by our technicians. They share the same structure principles and installation ways with the original CD1 and MD1. The following contents all take CD1 and MD1 for example.
 Our running scope mainly lies in series of electric hoist with 0.25~32t load and 3m~30m height. In addition, your special needs shall be met and non-standard hoists shall be manufactured.
 Electric Wire Rope Hoist is assembled by several parts: Hoisting Gear Box, Hoisting Motor  with brake, Rope Drum, Electric Control Panel and Traveling Trolley. All these units are separately accessible and can be promptly disassembled if any parts is broken to save cost.

CD1/MD1 Electric Wire Rope Hoists10-2.jpg

Detailed description of Electric Wire Rope Hoist
     1. Motor: Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque. 

CD1/MD1 Electric Wire Rope Hoists10-3.jpg

    2. Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
    3. Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
    4. Rope Drum: Grooved hoist Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
    5. Electric apparatus controlling system: Model CD1 and MD1 hoist is composed of the contactor box, controlling switch,  cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).
    6. Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.
    7. Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing, the pulley is thicken and widen than domestic common pulley.

CD1/MD1 Electric Wire Rope Hoists10-4.jpg

  CD1/MD1 Electric Wire Rope Hoists10-5.jpgCD1/MD1 Electric Wire Rope Hoists10-6.jpg

Application of Electric Wire Rope Hoist

They are not suitable for CD1 in the condition needed precise adjusting work such as precise installing, Clamping work, sand mode casting and so on, it needs to choose the MD1 wire rope electric hoist whose lifting speed is double.