Updated model glass cup sheet metal vacuum lifter for stone

Keyword:Vacuum Stone Lifters   Time:2019-5-9 15:58:03

Vacuum Stone Lifters6-1.jpg

 The stone vacuum lifters are mainly for workshop use for stone handling, the lifter capacity could be up to 300kg.
 the air powered lifters were used for marbles, granites in cutting machine feeding, unloading, for the quartz stone demold, we would offer the electric powered lifter for higher stability. The machine was designed in single suction pad with two vacuum chambers, each of them could be manually switched on/off for different slab size

Vacuum lifter designed for lifting, moving, installing a medium-size slab
 The rubber vacuum pad protect a slab from scratching
 The suction pressure maintaining firmly, ensuring a slab will not fall while operating
 Black and White rubber models are available
 Inclination: 0 - 90 degrees
 Minimum slab size: 44-1/8" x 24-3/8"

 

Air powered vacuum lifter with manual tilting from 0-90 degree

Model

PPD-MT300/1

PPD- MT300/3

load(kg)

300

500

Dimensiuon of pad

400-500

2*250-450
1*300*500

Pad number

1

3

Power supply

Compressed air

Compressed air

Air pressure

6bar

6bar

Air consumption

100L/Min

100L/Min

Tilting unit

Self-tilting

Self-tilting

Tilting degree

0-90°

0-90°

Control model

Hand Valve control

Hand Valve control

Vacuum Stone Lifters6-2.jpg

Vacuum Stone Lifters6-3.jpg

 Vacuum stone lifters offer secure movement of large slabs and finished pieces throughout your operation. Many not only offer vertical lifting but rotating and horizontal movement as well.
 RAMHOIST 6 Pad Vacuum stone Lifter is a suggestion of the stone fabricator needing to do a lot of panels for a commercial job. It needs a single pad  lifter to handle the smaller panels but also needs his slab lifter for full slabs, islands, and typical fab shop use.
 They the most versatile multifunctional stone vacuum lifter in the market.

 Vacuum Stone Lifters6-4.jpg

 RAMHOIST vacuum stone lifters for granite slabs, marble slabs or limestone slabs insure fast, easy lifting and setting off of stone slabs, Perfect for fitting and removing from grinding machines, radial arm polishers, bridge saws or indoor transport. It has easy PVC bushings, wear-resistant vulcanized suction cups, a vacuum pump, vacuum tank and a large safety gauge with easy to read markings in red, yellow and green so you can be sure you have a good vacuum before you life the slab. With 3 large suction cups, RAMHOIST pneumatic vacuum lifters are designed for safety first!

Vacuum Stone Lifters6-7.jpg


Vacuum Stone Lifters6-8.jpg

Advantage

  • Designed for lifting, moving, installing a large-size slab.

  • Superior vacuum lifter will satisfy requirements of customers.

  • The two rubber vacuum suction pads protect a slab from scratching during being handled.

  • The suction pressure maintaining stably ensues a slab not fallen down during working process.

  • It is able to incline vertical from 0o – 90o

  • Biggest lifter in this family with 4 Vacuum Cups for superior lifting of heavier slabs

  • Safe, Efficient, Simple and Easy to use