Working at Height Worker Safety Fall Arrest Full Body Safety Harness

Clear the following fall arresters standards
 In order to ensure construction safety and strictly implement safety measures, safety protective devices such as safety belts, fall arresters, fire extinguishers, ceramic fiber cloth and other protective measures are strictly implemented in accordance with regulations to ensure that the construction process is always in a safe and controllable state. The necessity of fall arresters in construction sites is strongly emphasized.            

 The key working procedures are strictly required to ensure quality, especially the level, elevation and adjustment of driving wheel of mud scraper are strictly controlled within the design standards. After 20 days of careful construction and commissioning, the equipment is running smoothly.            

 Here are some important criteria for you to count Refer to the following criteria to buy the products for you.            

 *  Fall preventer with high strength steel or cast aluminium shell            

 *  The use of stainless steel, copper and aluminium built-in components can prolong the service life of the instrument and reduce replacement costs.            

 *  It is equipped with sealed ball bearings to make the cable stretch smoothly.          

 * Fall arresters  (human body fall arresters/heavy fall arresters) operates quietly and comfortably            

 *  Centrifugal blocking device makes free fall less than 24 inches (60 centimeters)           

 In general, the fall arrester operates in a range of 10-200 feet (about 3-60 meters).           

 * Fall preventer cable optional: galvanized or stainless steel cable, high strength dinima rope, polyester ribbon            

 *  Its cable length: 3 M 6 m 9 m 12 m 15 m 20 m 25 M.            

 The main structure of the fall arresters includes a shell, a rope clamp and a connecting plate.            

 There are two fixed handles on the front and back of the left end of the shell, two movable handles on the front and back of the right end of the shell, a rope inlet at the top of the shell, an outlet at the bottom, and a rope clamp in the  shell.            

 Two connecting plates are arranged on the front and back symmetrical planes of the upper and lower ends of the rope clamp of the fall preventer.            

 The holes at one end of the connecting plate of the fall arresters are matched with the protrusion of the rope clamp.The other end of the two upper connecting plates is connected with two movable handles through square pins respectively. The other end of the connecting plate is connected with the outer shell through circular pins respectively. The square pins and circular pins are connected with the outer shell through springs.           

  There are some springs with thickness of 2 mm and width of 3 cm in the interior of the high-altitude fall arresters.            

 These spring leaf coils are placed inside the gear of the fall preventer.            

 The role of leaf springs has been explained in detail before. So today we're going to talk about the material of the leaf spring inside the high-altitude crash preventer.           

 The leaf spring of safety fall preventer is made of high quality alloy steel plate.          

 Steel plate plays a vital role in the fall arresters, so we choose steel plate after carburizing treatment, this kind of steel plate is more anti-corrosion, wear-resistant, tougher.          

 Because of the working environment of leaf spring, it only has enough wear resistance, toughness can give full play to the working efficiency of fall arresters.