
Proposal for end truck wheels with bearing capsule and gearmotor to fabricate of the end truck in U.S.
Keyword: Time:2021-6-5 15:54:04
8/19
Hello,
I would like to purchase a large quantity of end truck wheels. Is this something you can offer pricing for me?
If you are interested I will provide details of what we need.
Thanks,
Tony Strobl
8/20
Hello Tony Strobl
Thanks for the inquiry, but regret we don't focus on wheels.
We are factory mainly for electrical chain hoist (single&dual speed), power trolley (single&dual track).
Sorry again.
Best regards
yang
9/7
Do you have any suggestions for a end truck wheel supplier?
Tony Strobl
9/7
Hello Tony Strobl
Although there are some wheel supplier around us, but we don't foucs on and don't know how about their quality, I am sorry.
Best regards
Yang
2/1
Hello Bill Riddle
Hope all is well.
Do you have any purchase plan for single-track trolley (end trucks) or chain hoist recently?
Thanks and best regards
yang
2/1
We purchase those kind of items almost daily. I would like to have a
proposal from you for end truck wheels with bearing capsule and gearmotor
only.
We could fabricate the rest of the end truck. I would consider purchasing in
bulk if the pricing is ok.
Thanks,
Tony Strobl
2/2
Hello Tony Strobl
Do you mean the attached parts (marked in red ellipse)
Await for your reply.
Best regards
Yang
2/2
Yes that is exactly what I want ....Please quote the following
20 sets - 2 ton crane up to 40' span
20 sets - 5 ton crane up to 60' span
20 sets - 10 ton crane up to 90' span
20 sets - 25 ton crane up to 60' span
2/3
Hello Tony Strobl
Attached offer.
Best regards
Yang
2/3
Can u please provide detail drawings or a sample would be best so we can determine the labor and material required to make end trucks complete.
Thanks
2/3
Hello Tony Strobl
Which sample you need?
Attached our size of end truck.
Best regards
yang
3/16
Yes can you please send sample of
End truck wheels for
5 ton 60' span Top running single girder
10 ton 90' span top running single girder
Thanks,
Tony Strobl
3/16
Hello Tony Strobl
Our company has the rules that the sample cost should be paid by our customer. I hope you can understand us.
Await for your reply and i work accordingly, thanks.
Best regards
yang
3/16
Ok please send the cost including shipping to our shop
*****
3/16
Hello Tony Strobl
Sea freight (to Detroit or Cleveland): 105
Air freight to your shop is much more than sea freight since it is calculated in KG (more than 250kg).
Await for your reply then I send your PI accordingly, thanks.
Best regards
Yang
3/20
Please send an invoice for the total amount you need to send us the samples
we are ready to proceed how can we make payment?
Tony Strobl
3/20
Hello Tony Strobl
Attached Proforma invoice, I select level 1 for your evaluation.
Best regards
Yang
3/20
Just to be sure can you please send picture of the items you are sending
with this invoice
Also can you accept paypal for payment?
3/20
Hello Tony Strobl
Attached pictures.
We never operate paypal before, today we appy a paypal account, but found there is a limit of 500 US $ for new user.
Could you TT to our company account which list on Proforma invoice, thank you very much.
Best regards
Yang
3/20
We will also need the bearing and bearing seat to mount to the end truck
frame.
Thanks,
3/20
Hello Tony Strobl
The goods include bearing and bearing seat but there is no picture now.
Best regards
Yang
3/20
Ok please send a picture when available. We are interested in proceeding and
also considering one more supplier. We will compare the samples and the
pricing and make a decision for a large quantity purchase.
Thanks,
3/20
Hello Tony Strobl
Attached picutres I just took.
Best regards
Yang
3/26
Hello Tony Strobl
Please send us its copy of bank receipt after you arrange the money, thus easy for our accountant to check, thank you!
Best regards
Yang
3/28
Please provide estimate to ship to Qingdao. We know another company that has
shipments coming here to our area.
Thanks,
3/28
Hello Tony Strobl
Estimate time to Qingdao port is 3 days, the nearest port for us is Ningbo port.
Best regards
yang
3/29
We would like to proceed but want to investigate the cost to ship with our
partner company shipment of other materials.
Can you please provide detail information for weight and size of package of
this first sample order.
Thanks,
3/29
Hello Tony Strobl
Weight: 440 KG
Size: (550*550*340 + 500*540*510) (L*W*H, unit: mm)
Best regards
Yang
4/4
Hello Tony Strobl
May I know your final decision? To use our ship or delivery the sample to Qingdao port? Thanks.
Best regards
yang
4/19
Based on this invoice what is required for us to take possession in
Cleveland OH? Customs?
We are prepared to proceed with the order.
Thanks,
Tony Strobl
4/19
Hello Tony Strobl
Yes, just customs.
Best regards
yang
4/19
Ok I will contact customs so that I understand what is required of us and
then place the order.
I would like to propose we pay 50% before shipment and 50% upon receipt of
goods for this first order.
Thanks,
Tony Strobl
4/19
Hello Tony Strobl
Attached revised PI according to your request.
Best regards
Yang
5/29
We are definitely interested just trying to understand the best value for frt. And import
Please quote the following
End trucks complete with motors
2 separate cranes – 4 end trucks total
10 ton top running double girder
46’ span
460 Volt 3 phase 60 hz
Class C
Please quote delivered to our shop in cleves OH
Tony Strobl
5/31
Hello Tony Strobl
Attached offer.
Best regards
Yang
6/6
Hello Tony Strobl
May I know you need the whole crane kits as offered.
Or you just need end trucks (*4) and double girder (*2)?
Await for your reply, thanks.
Best regards
Yang
6/6
Thank you for your follow up we were able to purchase for much better price from another supplier however we appreciate your proposal and plan to include you in our next request.
Thanks,
Tony Strobl
6/8
Hello Tony Strobl
Thanks.
end trucks: 2860
double girder (including electric part): 10130
best regards
yang
9/13
Thank you for your patience I have been preoccupied with the purchase of a new building and the move. I’ve had to put this project on temporary hold until we finalize our move.
I remain very interested in your product. Will you be attending the fabtech show in Las vegas this year?
Thanks,
Tony Strobl
9/13
Hello Tony Strobl
Thanks for telling and wish you very thing goes well.
Sorry we won’t attend fabtech show in Las vegas.
Best regards
Yang
11/24
Hello Tony Strobl
We are producing a passel of End truck wheel kits and Crane geared motors to US. Customer now as follows:
1 | End truck wheel kits: |
1.1 | GW150/PW150/5”/127MM/M3.5X40T |
1.2 | GW180/PW180/6”/152MM/M3.5X48T |
1.3 | GW230/PW230/8”/203MM/M4X55T |
1.4 | GW280/PW280/10”/254MM/M4X67T |
1.5 | GW330/PW330/12”/305MM/M4X80T |
2 | Crane geared motors, 230/460V, with elect. Brake, 4 pole (Dual voltage, 3 phases): |
2.1 | KD-050/.4KW/M3.5X12T / 70FPM |
2.11 | 2 spare 230V brake coils |
2.2 | KD-100/.75KW/M3.5X24T/ 140 FPM |
2.21 | 2 spare 230V brake coils |
2.3 | KD-100/.75KW/M4X10T/ 70 FPM |
2.31 | 2 spare 230V brake coils |
2.4 | KD-150/1.1KW/M4X20T/ 140 FPM |
2.41 | 2 spare 230V brake coils |
2.5 | KD-200/1.5KW/M4X20T/ 70 FPM |
2.51 | 2 spare 230V brake coils |
May I know if you need some sample to test like this? will forward you details if you are interest.
Await for your reply, thanks.
Best regards
Yang
11/24
Yes please advise the cost delivered we are very interested. Where is this shipment going? Can we combine the freight?
Sent from my iPhone
11/24
Hello Tony Strobl
Thanks for the interest, below is price of CFR Cleveland, USA, shipment will be 30 days.
Item. | Descripition | Unit | US $/Unit |
1 | End truck wheel kits: | ||
1.1 | GW150/PW150/5”/127MM/M3.5X40T | set | 192.61 |
1.2 | GW180/PW180/6”/152MM/M3.5X48T | set | 244.11 |
1.3 | GW230/PW230/8”/203MM/M4X55T | set | 478.95 |
1.4 | GW280/PW280/10”/254MM/M4X67T | set | 791.04 |
1.5 | GW330/PW330/12”/305MM/M4X80T | set | 935.24 |
2 | Crane geared motors, 230/460V, with elect. Brake, 4 pole (Dual voltage, 3 phases): | ||
2.1 | KD-050/.4KW/M3.5X12T / 70FPM | pc | 195.37 |
2.11 | 2 spare 230V brake coils | pc | 24.72 |
2.2 | KD-100/.75KW/M3.5X24T/ 140 FPM | pc | 232.00 |
2.21 | 2 spare 230V brake coils | pc | 24.72 |
2.3 | KD-100/.75KW/M4X10T/ 70 FPM | pc | 232.00 |
2.31 | 2 spare 230V brake coils | pc | 24.72 |
2.4 | KD-150/1.1KW/M4X20T/ 140 FPM | pc | 410.97 |
2.41 | 2 spare 230V brake coils | pc | 53.56 |
2.5 | KD-200/1.5KW/M4X20T/ 70 FPM | pc | 521.18 |
2.51 | 2 spare 230V brake coils | pc | 53.56 |
Attached wheel kits specification.
Best regards
Yang
12/10
Hello Tony Strobl
Attached some site photos of wheel kits and geared motor we just finish for US.
Best regards
yang
2/23
Attached some site photos of end truck we just exported, for your reference.
Attached some packing pictures of the end truck.
4/23
Hello Tony Strobl
Attached site photos of wheel kits and Geared motor we delivered to US. this month, for your kind review.
12/12
Thank you very much for your email we are VERY interested in discussing a similar order.
Please advise contact info for your customer in the US we would like to purchase a sample from them and make use of it in our new building for trial period….if all goes well we would be prepared to place a large order similar to or larger than the sample order you sent last.
Thanks,
Tony Strobl
11/7
We are very interested in how your experience has been in the
Please update quote for package similar to what you provided us in the email below
Thanks,
11/7
Hello Tony Strobl
We have experience in US and it is a developing period.
Thanks for the interest, below is price of CFR Cleveland, USA
Item. | Descripition | Unit | US $/Unit |
1 | End truck wheel kits: | ||
1.1 | GW150/PW150/5”/127MM/M3.5X40T Reduce standard shaft length by 15MM | set | 192.61 |
1.2 | GW180/PW180/6”/152MM/M3.5X48T Reduce standard shaft length by 15MM | set | 244.11 |
1.3 | GW230/PW230/8”/203MM/M4X55T Reduce standard shaft length by 68MM | set | 478.95 |
1.4 | GW280/PW280/10”/254MM/M4X67T Reduce standard shaft length by 79MM | set | 791.04 |
2 | Crane geared motors, 230/460V, with 460 volt brake coils, 4 pole (Dual voltage, 60HZ, 3 phases): | ||
2.1 | KD-050/.4KW/M3.5X11T / ( 5”/6”- 70 FPM) | pc | 195.37 |
2.11 | 10 spare 230V brake coils | pc | 24.72 |
2.2 | KD-100/.75KW/M4X9T/ (8”- 70 FPM) | pc | 232.00 |
2.21 | 6 spare 230V brake coils | pc | 24.72 |
2.3 | KD-150/1.1KW/M4X18T/ (8”-140 FPM) | pc | 410.97 |
2.31 | 4 spare 230V brake coils | pc | 53.56 |
2.4 | KD-200/1.5KW/M4X14T/ (10”/12”-70 FPM) | pc | 521.18 |
2.41 | 2 spare 230V brake coils | pc | 53.56 |
2.5 | KD-500/3.75KW with M4x40T (10”/12”-140 FPM) | pc | 951.17 |
2.51 | 1 spare 230v brake coil | pc | 78.83 |
Best regards
yang
11/18
Please send drawings and pictures
11/18
Hello Tony Strobl
Attached drawing of wheel kits.
Attached site photos of wheel kits and Geared motor.
(PS: we suggest to use green or blue paint instead of yellow since yellow paint is for crane and quality is not very good)
Best regards
yang
3/7
We are very interested can you please advise if the pricing below includes frt. to our location
******
2014/3/8
Hello Tony Strobl
It includes freight price to Cleveland port but not to your location.
Await for your reply.
Thanks and best regards
yang
3/9
What is required for us to pick up in Cleveland?
2014/3/9
Hello Tony Strobl
Taking the shipping documents we mail you by air, you can finish customs clearance and prick up the goods.
Await for your reply.
Best regards
yang
2014/09/19
Hello Tony Strobl
How are you?
We are interested to do business with you for end truck wheels and gearmotor, and you?
Best regards
yang
3/10
Ok we are very interested do you sell wire rope hoist as well?
2014/3/10
Hello Tony Strobl
Yes, we sell. But we are not UL or CUL certificated.
Await for your reply.
Best regards
yang
4/9
Hello Tony Strobl
How are you?
Attached Catalogue of our wire rope hoist.
Have a nice day.
Best regards
yang
8/17
Hello Tony Strobl
Attaches photos of previous email goods (wheels kits and geared motor) we delivered to US. for your reference.
Best regards
yang
8/18
we are now in our new building and I am ready to discuss this matter in a serious manner.
Please quote wheels for the following:
10 ton crane
88’ span
Crane girder wt. 16,500 lbs
Hoist wt. 1650 lbs
Travel speed – VFD (variable freq. drive motion) max speed 100 fpm
14’ wheel base
Wheel load max – 16 kips
We currently have 23 cranes to build that meet this requirement
5 ton crane
60’ span
Bridge wt. 10700
Hoist wt. 750
10’-4” Wheel base
Travel speed – VFD (variable freq. drive motion) max speed 100 fpm
Wheel load – max 9 kips
Please quote 10 cranes
Tony Strobl
8/19
Hello Tony Strobl
We dont know where is the wheelbase? as in my opinion, you may mean the track width but i found size is not correct, would you pls kindly check.
Thanks and best regards
Yang
8/22
I have some interest in coming to visit your site. Is travel to region safe at this time and what is a good time to schedule a visit?
Do you have a English interpreter available during such a visit?
Tony Strobl
8/19
Hello Tony Strobl
Yes, it is safe and this time is a good time.
I will accompany with you during your visit.
Await for your schedule, thanks.
Best regards
Yang
