Technical details of Self-propelled TELESCOPIC BOOM LIFT

There are telescopic boom lift and articulating boom lift used in diifferent application, While working radius of telescopic boom lift is bigger

Self-propelled TELESCOPIC BOOM LIFT (Diesel)

MODEL		SPT-23
MEASUREMENTS		Metric
Working height maximum		25m
Platform height maximum		23m
Horizontal reach maximum		17m
A	Platform length	1.83m
B	Platform width	0.76m
C	Height-stowed	2.49m
D	Length-stowed	11.08m
E	Width	2.49m
F	Wheelbase	2.8m
G	Ground Clearance-center	280mm
Lift capacity (restricted)		480kg
Platform rotation		±80° 0
Turntable rotation		360°      355°non-continuous
Platform  leveling		Automatical leveling
Drive speed -stowed		4.4km/h
Drive speed -raised		1.1km/h
Solid tire		36*14-20
Grade ability -stowed		30%  45%
Turning radius		3 /5.2m
Drive and steer mode		4 × 4 × 2
Control voltage		12V      12V DC Proportional
Engine		Cummins QSF2.8T-C71
Power		53kw/2200rmp
Fuel tank volume		151L
WEIGH		16500kg
STANDARDS COMPLIANCE		EN280:2013+A1:2015  GB25849-2010
Warranty		12  months, apart from man-made faults (see Warranty service)

Standard configuration

 4-wheel drive
 2-wheel steering
 High/low travel speed
 Weighing system
 Automatic Deceleration Device
 Working range of full amplitude
 Full proportional Control
 Protection system on Uneven Ground
 Automatic Leveling
 Emergency Descend system
 Anti-collision protection of platform
 Working table selection
 Engine restart protection
 Preheating of engine

Grade three Throttle control of engine
 Dust-proof protection
 Strobe light
 Horn(alarms)

Optional devices

 Platform rotation
 Generator sets(Hybrid power)
 Perkins engine
 Gas supply in platform
 Power supply in platform
 Working light in platform

 

SPT-23 SELF-PROPELLED TELESCOPIC BOOM LIFT（DIESEL power)

1. Functions of positioning upward & outward and crossing

The articulating boom machine offers muti-faceted functions of positioning
 upward, outward and crossing, so that you can reach whatever place
 you want to go through various ways.

2. Complete safety devices

 Standard configuration include four-link weighing devices, overload
 protection, automated detection device for detecting platform amplitude
 and height (automatic amplitude limiter), automatic control of the movement
 speed of the boom and traveling speed, and high-precision load sensor,
 to ensure the safety and stability of operation in all directions.

3.Compact structure

 The structures with size lower than 16m and electric motor type are
 compact, which make the boom can go through small opening and operate
 in small space.

4.Control box

 Full proportion joysticks and CAN bus as well as PLC control system
 With high positioning accuracy are easy to be controlled and can be
 operated by the users at will. The stainless steel control box with sealing
 cover and box cap, which can help prevent the electrical components for
 moisture and prevent the damage from welding slag.

5.Traveling system

 The closed circuit hydraulic traveling system consisting of electro
 -proportional variable pump, hydraulic control variable motor and flow
 Distribution value can gain relatively high drive speed and relatively

6. Power and Gas supply in platform
 As per the requirements of users, the platform can be equipped with
 AC380V power and compressed air pipe, to meet the users' special
 requirements.

7. Hydraulic system
 Closed circuit hydraulic travelling system has speed easily to be adjusted, wide speed range;
 the boom's hydraulic system adopts double value core circuit. which enhance the safety.
 The hydraulic components adopt European and North American pure brands.

  

8. Driving mode  4*2/4*4(optional)
 The four-wheel drive is powerful with great grade-ability

 

9. Swing-out engine tray
 It is easy for maintenance and repair

 

10 Active oscillation axle
 Active oscillation axle can perceive the terrain, and can guarantee that the machine can
 land on four wheels even on uneven road without reducing the driving force

 

11. Emergency descend system

 It guarantees that the boom can retract
 and descend in case of failure of engine and oil pump.

 

12. Hydro-cylinder protection and dust proof boom.
 All Hydro-cylinder rods have protective covers, and the boom head has dust-proof devices.

 

13. Rotary platform

 

 The rotary actuator with standard configuration can make the
 rotation range of the platform reach ±80°，which makes your work more flexible.

 

14. Strobe light
 Give alerting signal when working

15. Adjustable backlash
 The output gear of the slewing gear reducer is 2.5mm from the axis, can adjust the
 gear side clearance and reduce the free rotation angle of the boom.

 

16. JIB with large range of activities
 The jib angle ranges from-55°~+75°，so you can reach the place
 you want to go without operating the main boom

17.  Environment friendly
 The electric articulating boom use storage battery as the power source, so it is low noise
 and no emission, so it can be used indoor and other environments with special requirements.

18. Small structure size
 The electric articulating boom has smaller width
 and height(stowed), which is more suitable for indoor work.

19.  Manually-operated Emergency descend device
 The manually-operated pump in the system can be used to descend emergent.

20. Hybrid power(optional)
 The options of generator sets are available. and the generators can
 be used to charge the storage battery. They are suitable for outdoor
 operation in the places where recharging of the battery is not available.

21. Components of European & American brand
 The key components such as battery, traveling electric motor,
 controller and the gear reducer shall adopt pure European & American brand.

22. Anti-collision switch
 It is used to prevent the working sidebar from
 further moving in case of collision with obstacles upward.

Site Photos of Self-propelled TELESCOPIC BOOM LIFT