
Site photos of new fall arrester(ellipitical type)
Keyword:new fall arrester(ellipitical type) Time:2020-2-26 19:22:10
This Ellipitical fall arrester (retractable lifeline) has the capacity of 200KG, with alloy shell that it is collision resistance, when the car press, it can not deform or our of shape, the wire rope is 5mm, The bottom hook of Ellipitical one is Aluminum universal hook and the upper hook can be made with default shackle+rope+hook or shackle+O ring or O ring.
N.W.: 9.94kg/unit
The normal operating time for fall arrester is 15000 times, whit up and down consider 1 time, inclination angle of wire rope should be within 30 degree and forbidden to be more than this, should take with hand and not to drag on the ground, Care and maintenance regularly, this will prolong the service life.
No deformation after Car pressing
The 10m retractable lifeline's hole and 20m's hole is different, with more sturdy shell and then smaller hole for 20m, while 10m's hole is a little bigger.
if the hole is smaller, we need to use shackle to connect the hole and O ring, but we can also make hole reaming (enlarge the hole a bit), above lots of picutures is for 20m with only O ring.
Package:
Below is the front side, we can use our logo, no logo or with you own logo as authorized
Below is the reverse side
with no chinese words
with chinese words (default one)
Package of ellipitical type Self-Retracting Fall Arrester (retractable lifeline) 200kg
