Looking for a PW wheel for an old Shaw Box end truck from USA

Keyword：PW wheel Time：2022-3-2 9:15:24

咨询产品：  PW wheel
客户姓名：  Ryan
手机号码：
客户邮箱：  ryanh@*****.com
客户留言：  Hello, I am looking for a PW wheel for an old Shaw Box end truck. The overall diameter of the wheel flange is 9.125". The tread surface is 3" wide and approximately 8" diameter. The total width of the wheel is 5". I am unsure of the bearing size but the pin that goes through is 2.562" diameter. Do you have anything this size? Kind Regards, Ryan

RAMHOIST: 195 USD/pc

PW wheel for end truck.jpg

Customer: I have been trying to respond to Yang at info@ramhoist.com about a wheel request. My emails keep coming back as undeliverable. It says it is due to your spam filters.

RAMHOIST: Could you add my whatsapp or wechat: 008617302568001

咨询产品：  Plain Wheel
客户姓名：  Ryan Harms
手机号码：  712-****
客户邮箱：  ryanh@a***.com

Mr Yang. Please add my email to your safe list so it will not be rejected by spam filters. The info link on this website is also rejected. I have a document I wish to email you with my required dimensions for Plain Wheel order.

RAMHOIST: I have already added ryanh@a***.com to the safe list but can not addryanh@a****-mfg.com since email system rejected.

can you receiv below email i sent yesterday?

pls also CC to my another email: chainhoist@gmail.com

RAMHOIST: May i know if you have received below emails?

Customer: Mr. Yang,

I am receiving your emails. I sent a spec sheet to both of yours. Did you receive at either?

RAMHOIST: pls send again

Customer: Please see attached specifications.

Plain Wheel.pdf

RAMHOIST: 195 USD/pc

Customer: I would like to order 2 please.

RAMHOIST: Attached PI

Customer: Thank you Yang. Our accounting department will be sending payment by wire transfer.

Customer: Mr. Yang,

Wire transfer has been sent. You should see it tomorrow.

RAMHOIST: We have received money, thanks

pls double confirm you need two pieces of PW (plain wheel) but do not one piece of PW and one piece of GW (geared wheel), for geared wheel we need to know module and teeth.

Customer: Yang, I need 2 pieces of plain wheel only. No geared wheels.

RAMHOIST: Please confirm the thickness of the two red circled in the PW (Plain wheel), This can be calculated: (E-C)/2 = (5-3)/2= 1" , but looking at drawings, the thicknesses are not the same on both sides. Please confirm this.

这两个画红圈的和客户确认一下厚度吧，这个本来用E-C 除以2可以算出来，但看客户的图纸，两边又不一样厚，这个确认一下吧

Please confirm the thickness of the two red circled in the PW (Plain wheel).png

Customer: Mr Yang,

Both sides are 23mm, or .905 inches thick on ours.

If you look at the photograph I have attached of one of our spare Geared Wheels you will see there is also an indention in the wheel. This is 7mm deep by 171.45mm wide. This is also on both sides of the wheel.