ENQUIRY FOR COIL TILTER 10MT
Keyword:COIL TILTER Time:2021-12-28 14:39:00
RAMHOIST: May i know the product's size? thanks
RAMHOIST:
Item | Model | USD/unit | QTY | AMOUNT (USD) | Remark |
Coil Upender | FZ10T | 7000 | 4 | 28000 | platform size: 1500mm*1500mm, V-bed on one side (keep wooden pallet slot) and flat on other |
1. Photo of Coil upender:
2. Product usage:
This machine can adapt to the turnover requirements of different specifications of goods, and realize the goal of converting the horizontal type to the vertical type or the vertical type to the horizontal type. It is widely used in metallurgy, mold, papermaking, cold storage and other industries.
3.Product features
●Mechanical overturning system, no overturning phenomenon occurs.
●The four-roller mechanism ensures the smooth operation of the equipment.
●The inner bearing of the roller adopts high-strength bearings, which are wear-resistant, high-temperature resistant, and have greater radial bearing capacity.
●Multiple limit protection to ensure safety.
●Hard tooth surface industrial reducer, stable operation.
●Parking brake self-locking function, can stop at any position, the flip body is locked in place, safe and reliable.
●A side and V side are equipped with a PP board to protect the product from scratches, and a pallet slot is kept to facilitate the transfer of the product.
●The body is sturdy and durable.
●Wireless remote control can be operated remotely.
●Safe, stable and fast.
●This machine is ISO9001 approved
4.Technical parameter:
Model | FZ10T |
Max load bearing | 10T |
Power of motor | 2.2KW |
Turnover speed | 0-40s±10% |
Transmission mode | Mechanical drive |
Reduction ratio | 1:126 |
Table size | 1500mm*1500mm |
Mode of operation | Independent control/Wireless remote control |
Deadweight | About 2.7T |
Max turning angle | 90° |
Voltage | 380V 50HZ |
5.Main electrical equipment:
Name | Brand | model |
Reducer | JUNQING | SR87 |
Contactor | DELIXI | LC1D18 M7C |
Circuit breaker | DELIXI | C32N |
Thermal protector | DELIXI | JRS1Dsp-25 |
Wireless remote control | YUDING | / |
Emergency stop switch | SCHNEIDER | XB2-BS542 |
Start button | SCHNEIDER | XB2-BA31 |
Indicator light | SCHNEIDER | AD16-22D/S |
Travel switch | MOUJEN | ME-8108 |
Terminal block | TEND | TBR-10 |
Chain | ZIQIANG | 1.2 |
Bearing | HRB | 62122RS |
please send me the technical datasheet
RAMHOIST: all technical sheet is above, pls check, thanks
Awaiting Your Kind Reply soon,
我们正在研究报价
但请注意钢卷是由 C 钩和钢卷抓钩(如下图)处理
正如您所看到的,当钢卷再翻转机上时,很难用钢卷抓钩
让我知道我们如何解决问题
RAMHOIST: Below type Coil Tilter can reach your requirement for using C Hook and Coil Grab, with additional 700 USD
RAMHOIST: Check more photos below:
RAMHOIST: Dimension of 1.5m coil tilter
XB/FZ-Cylinder form (suitable for steel coil paper roll/cylindrical body) [XB/FZ-圆筒形式(适用于钢卷纸卷/圆柱形体)]
Type: | B | C | E | G | H | F▲ | N★ | T★ | P★ | P1★ |
1.5m layout | 2434 | 1440 | 500 | 1500 | 2356 | 994 | 1300 | 145° | 300 | 850 |
Remark:
1. The schematic dimensions is in accordance with the company's standard (can be customized) [图示意尺寸依照本公司标准执行(支持定制)]
2. Size of marked ★ is the company's implementation standard (can be customized) [标注★尺寸为本公司执行标准(支持定制)]
3. The blank size of the raft is 200 (can be changed according to the actual size) [木筏空档尺寸为200(可根据实际尺寸更改)]
4. The size of P is customized according to the size of the hook [P的尺寸根据挂钩尺寸定做]
5. This machine is suitable for the minimum coil diameter of 800, the maximum coil diameter of 1500 and the coil width of 1500 (not counting the size of the pallet). The maximum load weight is 10 tons, and the ultimate load weight is 11 tons. [本机适用最小卷径800最大卷径1500卷宽1500(不计算栈板占用尺寸)负载重量最大10吨,极限负载重量11吨]
RAMHOIST: yes, we can give you same price
RAMHOIST: Yes, Remote control and Normal both available, if the input voltage of the machine is different, a transformer will be added!
The weight of the machine is about 2.7 tons
Rotation speed about 40 seconds
RAMHOIST: The drawings are general-purpose drawings, which can only be seen roughly. The machines like yours are definitely different from the drawings. Basically, they are customized according to the requirements.
Pls provide the hook size and we will redesign the drawing. The one sent to you can only be used as a size reference. Both hooks can be used, but the size of the hook cannot be seen from the picture. The size of the hook is set to open. The width and depth of the side of the groove, so I need to know the size of the hook to consider the hook groove avoidance on the equipment. The size attached I marked for the two hooks needs to be provided. If there are all the dimensions of the hook, then better
RAMHOIST: No problem for your size, we will send you detailed drawing after receiving advance payment for the order, thanks
Below is 3D model drawing for your reference firstly, hope you can understand: