Supplied a lot of Electric wire rope hoist from Taiwan with H beam box beam etc, means complete sets of Double girder overhead crane for yarn dyeing factory

Keyword:Electric wire rope hoist   Time:2021-7-24 9:29:36

日期:

2015413 下午12:03

主题:

Re: KITO type hoists

Dear Sir,

Origin China or Taiwan?

Thanks
Khan

 

4/14

Dear Khan

Thanks for the reply.

Origin and assemble is china.

Electric parts is from taiwan

Chain and bearing is from japan.

Standard is US standard.

Best ergards

yang

 

4/14

Will attend at Shanghaitex 2015?

 

4/14

Dear Khan

Regret we will not.

Best regards

Yang

 

4/14

Dear Mr.Yang,
Did u supply any crane to Bangladesh?
Thanks
Khan

 

4/14

Dear Khan

We mainly focus on hoists.

You can visit our website: www.ramhoist.com

Best regards

Yang

 

4/16

Dear Khan

Attached site photos of electric chain hoist and end truck we produced for US, for your reference.

Best regards

Yang

 

4/16

Do you make electric rope hoist?

 

4/16

Dear Khan

Yes, we make.

Attached technical specification.

Best regards

Yang

 

4/23

Dear Khan

Attached site photos of electric rope hoist we delivered before.

Best regards

Yang

 

4/23

Dear Mr.Yang,
I will visit Shanghai on 14th June.
Pls advise which province is your factory?
Thanks
Khan

 

4/24

Dear Khan

We have factory in shanghai.

Pls inform me in advance when you arrirve shanghai that we will arrange.

Thanks and best regards

yang

 

9/4

Dear Khan

Attached exploded drawing of the electric wire rope hoist.

best regards

yang

 

10/9

Dear Khan

Attached site photos of our detailed electric wire rope hoist

best regards

yang

 

2/9

Dear Mr.Yang,
We supplied a lot of Electric wire rope hoist from Taiwan with H beam
box beam etc, means complete sets for yarn dyeing factory. If you can
provide good quality and then we can cooperate you.
Thanks
Khan

 

2/29

I don't know why didn't reply yet
Dear Mr.Yang,
Pls see the attached file (below), as per the specification pls give your best
price and also give reply to all questions as attached.Thanks
Khan

Crane Specification.

1.      Brand Name.

2.      Country of origin.

3.      Capacity scope.

4.      Connected load: 10 TONS

5.      Span length: 22.5meter

6.      Runway beam(H beam): 65meter

7.      Runway beam squire bar(rail):65m

8.      Runway beam bus bar(65meter)

9.      Lifting height.12meter

10.   Lifting speed.

11.   Trolley speed.

12.   Crane speed.

13.   Work duty.

14.   Track type.

Gear & Gear Box (utilizing advanced metallurgical specifications, tooth design, and heat treatment options & maintenance frequency).

15.   Wheels & sheaves (metallurgical specifications & maintenance frequency).

16.   Types of motors.

17.   Types of control of crane.

18.   Hoist Drum (metallurgical specifications, maintenance frequency, rope guiders & life time,).

19.   Shafts (metallurgical specifications).

20.   Hoist-duty wire rope (metallurgical specifications, maintenance frequency & life time).

21.   Brake (types of friction brake parts & maintenance frequency).

22.   Bearing (types 0f all bearings & maintenance frequency).

23.   Contactor (Are contactors IEC & NEMA certified?).

Bottom block (Are the bottom block have hooks, frames, pins, sheaves, bearings, rope safety guiders, holding handle and safety latches?).

24.   Hoist motor Enclosure type.

25.   How many safety points.

26.   Control voltage

27.   Nominal power of crane

28.   Nominal power of hoisting motor

29.   Weight of crane

30.   Weight of crane bridge (without hoists)

 

2/29

Dear Khan

Sorry.

1. Do you need single girder or double girder overhead crane?

2. The voltage?

3. How about the crane's working duty?(How many times it will work one day? and how many hours it will work one time?)

4. What material the hoist lifting for?

Thanks for your reply then I will work further.

Best regards

Yang

 

3/3

Dear Mr.Yang,
1.Double girder overhead crane
2.380+-5%
3.The crane will use for Yarn dyeing factory. So You have to have idea
about the used hours.
4.Yarn dying carrier.
Thanks
Khan

 

3/3

Dear Khan

24600US$ (FOB china)

Attached technical drawing.

Best regards

Yang

LH10t-22.5m H=12m.pdf


3/4

Dear Mr.Yang,
We need price in details.
Pls advise your scope of supply.
Is it included everything? Length wise H beam, rails, installation etc.
Customer will provide nothing. You will provide everything.
Thanks
Khan

 

3/4

Dear Khan

the price include the following parts:

1).Main Double Girder 2). End Beam 3). Electric hoist frame

4).Electric hoist 5). Pendent control. 6). Accessories [ Cables, Overload limiters etc. ]

7).Electric parts: Schneider

It does not include Length wise H beam, rails, installation.

Below the answer of your attachd file---Crane Specification.

Best regards

Yang

 

Crane Specification.

1.      Brand Name: Neutral

2.      Country of originChina

3.      Capacity scope: 10t

4.      Connected load: 10 TONS

5.      Span length: 22.5meter

6.      Runway beam(H beam): 65meter

7.      Runway beam squire bar(rail):65m

8.      Runway beam bus bar(65meter)

9.      Lifting height.12meter

10.   Lifting speed. 7m/min

11.   Trolley speed:20m/min

12.   Crane speed:24m/min

13.   Work duty :M5

14.   Track type.

Gear & Gear Box (utilizing advanced metallurgical specifications, tooth design, and heat treatment options & maintenance frequency).

15.   Wheels & sheaves (metallurgical specifications & maintenance frequency).

16.   Types of motors: Lifting motor: ZD151-4  Trolley traveling motor: YSE80-4  Crane traveling motor: YSE90L-4

17.   Types of control of crane:  Pendent Push Button

18.   Hoist Drum (metallurgical specifications, maintenance frequency, rope guiders & life time,).

Please kindly check  Part 4 & 10 :  Safety device

19.   Shafts (metallurgical specifications).

Please kindly check  Part 4 & 10:  Safety device

20.   Hoist-duty wire rope (metallurgical specifications, maintenance frequency & life time) A3

21.   Brake (types of friction brake parts & maintenance frequency). \

Please kindly check  Part 4 & 10:  Safety device

22.   Bearing (types 0f all bearings & maintenance frequency).

Please kindly check  Part 4 & 10:  Safety device

23.   Contactor (Are contactors IEC & NEMA certified?). ISO Standard

Bottom block (Are the bottom block have hooks, frames, pins, sheaves, bearings, rope safety guiders, holding handle and safety latches?).

24.   Hoist motor Enclosure type.

25.   How many safety points.

No.

Safety Measures

Foundation

Location

1.

Loss of pressure fault phase protection

1. When the voltage is too low, the electricity will disconnect

2. When the phase is changes, the electricity will disconnect

Inside the Electric Box

2.

Over Voltage, over current protection

1. When the voltage is too big, the electricity will disconnect

2. When the current is too big, the electricity will disconnect

Inside the Electric Box

3.

Overload Limit Switch

1. When the lift capacity is more than the max rated lift capacity, the electricity will disconnect, crane will stop work

On the wire rope

4.

Weight limit

1.   Supervise the decrease of hook. There is a limit height. The hook cannot fall any more if reach this limit

On the Wire Rope Hoist

5.

Fire limit

1.   Supervise the up and down limit position of Hook. Avoid the over increase and over decrease, protect hoist

On the Wire Rope Hoist

6.

Crane Travel Limit Switch

1.   Supervise the travel of crane, and stop crane travel more than rated travel distance. Keep Safe

On the 2 end beams.

 

26.   Control voltage380v,3phase, 50hz

27.   Nominal power of crane: 1.5*2kw

28.   Nominal power of hoisting motor: 0.8*2kw

29.   Weight of crane:  18561kg

30.   Weight of crane bridge (without hoists):  17.5t

 

3/4

Dear Khan

Attached Part 4 & 10 : Safety device & Examination and maintenance of crane

Best regards

Yang

Part 4 & 10 _Safety device & Examination and maintenance of crane.pdf