Lift Mate or jack mate of Farm jack 20'' 33'' 48'' 60'' 4x4 Car Jack Mate For Farm Jack Accessories Tire Lift Mate

Keyword:Lift Mate or jack mate of Farm jack 20'' 33'' 48'' 60''   Time:2022-1-9 9:51:17

Products  Description

Product: lift mate / jack mate
 Width: webbing width 50mm
 Length: 25mm
 MBS: 5000lbs
 Hook: vinyl coated double J hook
 Material: polyester and steel

 Farm jack4-1.jpg


Quick Details
 Use: Car Jack
 Place of origin: Jiangsu, China
 Brand  Name: RAMHOIST
 Warranty: 1 year
 Product Name:  Jack mate
 Width: 50mm/2 Inch
 Color: Any
 Material: 100% Polyester/Iron
 Packing: Carton/customer's requirement
 Application: emergency
 MOQ: 500pcs
 Shipment:  sea/train/air
 style: auto accessory
 Port: Ningbo or shanghai, china

Supply Ability
 200000 Piece/Pieces per Month

Packaging  & Delivery
 Packaging Details: Carton/customer's requirement
 Lead Time:
 Quantity(Pieces)     1 - 1000     >1000
 Est.  Time(days)      35  To be negotiated

The Hi-Lift Jack Lift Mate is perfect when you need to get a wheel up for some reason but you run out of jack. It’s an underrated Hi-Lift accessory that works extremely well. Sometimes you get high-centered or stuck on some obstacle. It could be a rock, a ledge, a sand dune, a tree stump, a log, or a deep rut in a muddy area. Often, you can jack up your 4x4 at the bumper or slider, put a rock or log under it, lower your tire onto the rock or log, and drive away. This technique won’t work if you have a super-flexy suspension, or just happen to be badly positioned, because your Hi Lift will be too short. With a lot of suspension travel, some rigs will max out the jack before lifting a tire.    

The Hi-Lift Lift Mate fixes that problem by attaching directly to your wheel. By lifting your wheel directly, you don’t need to worry about the flexiness and travel of your suspension. It’s also safer than lifting at the bumper or slider because you won’t be lifting your rig up to some crazy height just to get a rock under the tire. While this might not be a big deal on level ground, on an off-camber trail a high center of gravity and high angle could put your 4x4 in a precarious position. Lift Mate Wheel Straps The Jack Mate will be kinder to your wheels than running a chain through the spokes, plus it'll stay attached to the jack better than a chain! 

Lift Mate in Action 

If you stack rocks on the trail, make sure you unstack them to keep the trails tough and fun! 

The Lift Mate 

The Lift Mate is super handy on the trail when you need to jack up a tire or the whole side of your rig, especially when you're stuck on an obstacle. 

The Hi Lift Lift Mate is rated for 5000 lbs. This should be fine for most 4x4s since you’ll only be lifting one wheel at a time. The hooks are made from 1/2” OD steel that are coated with rubber. The hooks are large enough to fit stamped steel wheels and most aluminum wheels. Some aluminum wheels are too thick for the hooks, so you should test fit the Lift Mate when you get it to be sure it works with your wheels. The hooks are versatile enough that you could use them to lift anything with an edge within the weight rating, like a bumper or a mower deck. The Lift Mate attaches to your Hi Lift with the included 5/16” bolt.    

 Farm jack4-2.jpg 

 About the item
 *  The Lift-Mate allows any Farm jack to lift a wheel or vehicle directly from the wheel
 * Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height
 * 5, 000 pound lift capacity
 * Rubber coated hooks protect wheels
 * Rubber pad protects tire/wheel at lifting point on jack
 * Fit Type: Vehicle Specific
 * Included Components: Jack Nose Adapter,polyester Straps With Hooks

 Farm jack4-4.jpg

 Q1:  Are you a factory or a trading company?
 1.  We are a factory focused on Cargo Control products over 15 years.
 2.Our  main product are Farm Jack, Ratchet Tie Down, Buckle Strap, Tow Strap, Slack  Line, Webbing Slings, Safety Belt, kinds of webbing, etc.
 Q2:  Can you provide OEM/ODM service?
 Yes.  We have professional designers and engineers provide excellent OEM/ODM service.
 Q3:  What is your MOQ?
 Usually it's 500pcs -1000 pcs for each type.
 Q4:  Do you have certificate?
 Yes,we have the certificate of IS09001:2008 and most of our products have been approved by TUV GS certificate

Q5:  What about logo printed?
 Your own logo can be printed on label,webbing or package!
 Q6:  How do you control your quality?
 1.Selection of high-quality material
 2.  Production process standardization, process standardization, refinement.
 3.  Testing products before bulk production every time.
 4.  The third party product inspections are acceptable.
 5.150  Quality Management System Certificated Factory
 Q7:  How can I get samples?
 We  are honored to offer you a small quantity of free samples, but clients are expected to pay for the courier cost.
 Q8:What's your terms of delivery?
 Q9:  What are your payment terms?
 In generally,payment terms is T/T 30% Deposit, 70% by the Copy of B/L.
 Q10:  How about your delivery time?
 Delivery time will be within 35 - 45 days. We have a strict production schedule. When we get an order, we'll draw up a detailed schedule.