RACK LEVER JACK : 3400010707- Lifting equipment

Keyword:RACK LEVER JACK   Time:2022-1-30 15:46:24

Good day
Kindly find attached a document with specifications and quantities of the items we require and provide Quotation and indicate Total Volume(CBM) and freight charges to MOMBASA PORT ,KENYA 



Item#Requested SpecificationsQTY requiredUnit of measureMeets specificationsVendor’s Offered Specifications
1Rack jack with fixed claw, according to DIN 7355 and compliant to BGV D8, load capacity 1.5 to, overall height 725mm, lifting height 350mm
CARL STAHL 151 820000 15001
Note: This item is a safety item and must carry the required approvals (BGV D8). The items are designed to work as a system. Therefore, only the item listed above with manufacturer and number is acceptable.

 77 USD/unit  (type: MJ015)

technical details: http://ramhoist.com/lifting-handling-equipments/MechanicalJacks.html

2Self-propelled, articulated boom lift with following specifications:
- conforming or exceeding reach chart below

- hydrostatic four-wheel drive
- diesel powered, tier 4 engine min. 36 kW
- hydrostatic four-wheel drive
- diesel powered, tier 4 engine min. 36 kW
- platform height min. 13.5m
- horizontal outreach min. 7.5m
- up and over height min.7.3 m
- platform capacity min:345kg restricted,445kg unrestricted
- platform rotator 180°
- platform with side entry
- platform size min, 0.75m x 1.80m
- articulation range min 145° (+76 -69)
- swing 355°
- no tail swing

- drive speed > 5km/hr
- Gradeability min 45°
- ground clearance min. 40cm
- foam filled outdoor tyres
- max. ground pressure 5,35 kg.cm²
- load sensing system
- 5° tilt alarm
- compliant with ANSI A 92.5, CSA B 354.4, EN   280, AS 1418.10
JLG 450 AJ HC3, or equivalent

3Single direction vibrating compactor with following specification:
- vibrator plate 500mm
- operating Weight 110 kg +/- 20kg
- Baseplate W x L 500 x 600 mm
- base plate made of extremely resistant nodular cast iron (GJS-700)
- Machine Height 620 mm + 50mm
- Working Height of Handle (adjustable) 838 - 1093 mm
- Base Plate Thickness min. 8 mm
- Centrifugal Force max.18 kN / 4.05 lbf
- Vibration Frequency 90 Hz / 90 vpm
- Maintenance-free and load-resistant exciter bearings
- Forward Speed 22 m/min
- Max. Gradeability 30%
- Compacted Area 660 m2/h
- powered by air cooled single cylinder 4 Stroke Diesel
- min. Power Output (DIN-ISO 3046*) 3.4kW / 4.6hp @ 3600 rpm
- Displacement min. 230 cm3
- min. power output 1.4kW / 1.9hp @ 3520 rpm
- Fuel Consumption1.0 litres/h
- Fuel Tank Capacity min.3 litres
- Max allowable tilt of engine in continuous operation 30°
- Power Train from drive engine via centrifugal clutch and V-belt directly to the Exciter
WACKER- NEUSON DPS 1850H, or equivalent

Note to vendors:

Note 1: vendors must state for each line item, which make and model they are offering.
Note 2: Vendors must submit technical documentation for the make and model they are offering to supply. The minimum technical documentation acceptable is a copy from the manufacturer's catalog with the pertinent technical data for the particular make and model of each line item, or the manufacturer's technical specification sheet for the make and model of each line item.

Customer: Good day
Provide Quality certificates please

RAMHOIST: Below pls check Quality certificates in chinese version, will translate to English version when order confirmed, thanks

Quality certificate for Mechanical Jack (Rack jack with fixed claw).jpg