(M): Shackles for Kuwait

Keyword:Shackles   Time:2023-3-13 11:59:57



Greeting form M/s. Delite Engineering Center.


We M/s. Delite Engineering Center kindly request you to quote for the supply of Shackles as per the below requirement details.







Shackle: Anchor or Bow

·         Bolt & Nut Safety Pin Type

·         Conforming to US FEDERAL spec. RR-C-27\F, Type IVA, Class 3, Grade A or EN 13889:2003+A1:2008 applicable standard shall be clearly quoted and a copy of the same in English shall be submitted with the offer if it is not one of the above hot dip galvanized to BS EN ISO 1461 or ASTM A 153 - Class B3.

·         Marking shall be as per the governing standard.

·         MTC (Mills Test Certificate) and the manufacturers actual proof load test certificate correlated with the shackle by heat no. or traceability mark on the shackle body shall be provided with the material.

·         Body Dia: 1-3/8 Inch

·         Safe Working Load (SWL) or Working Load Limit (MIN.), M. TON 13.5




Also, please share the following documents:


  • Company Profile

  • Technical Data Sheet

  • Certificates required as per the above specification



  • Quote to be provided by 24-March-2023.

  • Please quote the exact as per the above specification.


Your prompt response is appreciated as it is on urgent basis.


For any queries please contact under signatory.


  • Company Profile: http://ramhoist.com/about/

  • Technical Data Sheet:

  • Certificates required as per the above specification