Steel Plate Railway Flat Electric Transfer Cart 5 Ton

Keyword:Electric Transfer Cart   Time:2019-4-24 15:00:14

Product Description
 Electric material transfer workshop railway cart
Brief Introduction about workshop railway cart
 Electric material transfer workshop railway cart, it is a workshop railway cart powered by towing cable which is laid on the ground. The cable line is placed between the two rails or one side. The operation system is low voltage 36V power. It has widely applied in the industry transportation field all over the world. Our cart is available in a number of configurations specifically designed to suit the needs of our customers.
Electric material transfer workshop railway cart
 Working Principle of workshop railway cart When the workshop railway cart moves, the cable pulls behind the cart. The cable is connected to the ground at one end, while the other is powered by an electric control box on workshop railway cart, and then provides the power to the engine. The workshop railway cart conduct AC 380V directly into the electrical control system of the workshop railway cart to let it start, stop, go forward and backward and so on.

The workshop railway cart can be customized by your true situation, the proper solution will be recommended to you after knowing your plant, hope rich experience (more than 15 years) can help you well.

All customized for you.
 The workshop railway cart can be equipped as per your requirement.
 As per the transported cargoes, the V frame, U frame, rubber pad, wooden pad, weighing device...can be equipped.
 As per the working environment, the anti-high temperature, anti-explosion, anti-rust, anti-skid measure can be adopted properly

Advantages
Electric material transfer workshop railway cart Advantage of workshop railway cart
 This series workshop railway carts are suitable to be used in the bad environment, for example, high-temperature and anti-explosion condition;
 AC motor, simple structure, not limited for the using time;
 It has no strict requirement on the rail's installation;
 Cost is not high, easy to operate and maintenance;
 The workshop railway cart is customized as per your true demand.
 Parts Showing
Electric material transfer workshop railway cart
Parts showing of workshop railway cart
 Frame
 The frame adopts box beam structure according to the crane principle and combined with the design of the cart. It is with large load capacity, long service lifetime. Besides, not easy deformation and can effectively ensure the smooth of the platform.

Professional Supplier of Railway Electric Transfer Carts5-1.jpg

 Three in one reducer & AC motor
 This type gear box with advantage of high efficiency, operate steadily, easy installation and maintenance, etc; Brake is composed by brake frame, brake parts, brake operating device and so on, it is a safety device to ensure trailing cable rail vehicle working safely; The electric motor is AC motor.

Professional Supplier of Railway Electric Transfer Carts5-2.jpg

 Cast Steel Wheel
 The wheel, its material is ZG55, Change conveniently, install easily, the larger capacity cargoes can be transported, the largest capacity can reach to 500 ton.

Professional Supplier of Railway Electric Transfer Carts5-3.jpg

 Electrical control box, control method and Safety device
 There are power source switch, emergency stop switch, alternation switch, indicator light, etc, which can make the operation more safety; There are pendant control and remote control two methods, certainly, control panel also can be installed as your demands; Safety device: sound & light alarm, bumper device, automatic stop device.

Professional Supplier of Railway Electric Transfer Carts5-4.jpg

 Drag chain & Cable
 The workshop railway cart is powered by towing cable which is laid on the ground. For the condition of short running distance and lower speed, the chain can be used to reduce the abrasion of the cable.


Service:
 Our commitment: The load bearing safety factor of the Transfer cart is no less than 120%.
 Freely design the auxiliary device or foundation drawing, and offer the technical service and drawing material.
 16 hours engineering service and 24 hours internet service for our customers.
 During the warranty period, if our Transfer cart can't work normally, we can support you repair technology or replace relevant parts for you within 24 hours.
 Solving the quality problem within 24 hours, serious attitude from beginning to end. Value the reputation and Preserve the image of our company.

Professional Supplier of Railway Electric Transfer Carts5-5.jpg

Professional Supplier of Railway Electric Transfer Carts5-6.jpg

Professional Supplier of Railway Electric Transfer Carts5-7.jpg