Three Steps of vacuum stone lifter Operation

Three Steps of vacuum stone lifter Operation
 Traveling vacuum stone lifter is a large-scale lifting equipment, which should be checked  before working. Besides, there are many steps in the working process. vacuum stone lifter manufacturer has found a lot of experience in the vacuum stone lifter industry for many years. Safety is very important for every worker. Let's take a look at together. How  to realize the safe and effective work in hanging enterprises?           
 The first step is to pay attention to sequence security. When operating the controller handle, it must first shift from "0" to the first gear, then step by step increase and deceleration. When changing direction, it must first turn back to "0".           
 The second step is to test the lifting of heavy tonnage objects slightly off the ground to ensure that the hanging is smooth and the braking is good, and then  drive. It is not allowed to operate three control handles at the same time. If there is a sudden power outage in operation, the switch handles must be placed at the "0" position. When parking at work, suspended objects shall not be suspended in the air to stay, suspended objects shall not be allowed to pass over people's heads, and lifted objects shall not be too high from the ground.           
 The third step is to grasp the distance and prevent "rear-end collision". When running, two vehicles should keep the distance and collision is strictly prohibited. Open-air traffic should stop working in case of heavy rain, lightning strike or gale above grade 6, cut off the power supply, and pad the front and rear wheels firmly.
 In order to reduce accidents, special caution should be taken in the operation of vacuum stone lifters. Next, remind you of the three elements of the safety of vacuum stone lifter operation:           
 1.  When operating the controller handle, it must first shift from "0" position to the first gear, then step by step increase and deceleration, and  then turn back to "0" position when reversing direction.           
 2.  When lifting heavy tonnage objects, it is necessary to test the lifting slightly off the ground to confirm that the hanging is stable and the braking  is good, and then drive. It is not allowed to operate three control handles at  the same time. If there is a sudden power outage in operation, the switch handles must be placed in the "0" position. When parking at work, suspended objects shall not be suspended in the air to stay, suspended objects shall not be allowed to pass over people's heads, and lifted objects shall not be too high from the ground.           
 3.  When running, the distance between two vehicles should be maintained and collision is strictly prohibited. Open-air traffic should stop working in case  of heavy rain, lightning strike or gale above grade 6, cut off the power  supply, and pad the front and rear wheels firmly.
 Installation of electric equipment for vacuum stone lifter has always been an important part of the whole equipment installation. The cable is mounted on the pulley. The length of the cable is suitable and uniform, and the sliding motion is flexible. After an accident occurs, the operator should cooperate with the ground and slowly drop the hook to see if the pulley group can still be used. If it can not be used, it is not necessary to land. Before leaving the cab after work, the first wheel or handle of all controllers must be pulled back to the original position; all controllers operated mechanically must be pulled back, and then the main switch will be closed.           
 Correct operation can ensure the safety of vacuum stone lifter. When an accident occurs, panic is a great danger.