Maintenance and use of vacuum stone lifter

Maintenance and use of vacuum stone  lifter
 Whether it is a vacuum stone lifter or crane should be well maintained, why do you say so? Next, I will briefly introduce some problems about crane for you. The vacuum stone lifter will be covered by a lot of garbage if it has been used for a long time. If the garbage situation on the surface is not cleaned up in time, it will be attached for a long time. The surface of the fuselage will be oxidized, so it should be cleaned up in time after work.            

In the work may accidentally wipe the paint off the fuselage, at this time must not let oil and water erode the crane, will rust, should be brushed to suction cup new paint to prevent rust. Put it in a dry and ventilated place, as far as possible without contact with water. Vacuum stone lifter maintenance work efficiency will be better, in order to extend the service life. Parking on uphill or on rainy or snowy days should keep a long distance from the front and rear vehicles. After waiting for the car to stop, pull the parking brake handle backward to lock state; if the ramp stops, the pad should be placed before and after the wheel. When parking, the transmission lever must be placed in neutral position.            

Vacuum stone lifter tells us that the engine should press the accelerator pedal twice or three times before extinguishing, so that all parts of the engine can be fully lubricated. Keep the engine idle for several minutes, and then stop the engine when the cooling system temperature drops. When temporarily parking vehicles on the road at  night, danger warning lights should be turned on.           
 There are many construction sites around us and many other places need to use vacuum stone lifter to transfer materials. It brings us a lot of usefulness, but in fact, in our life, there are many places that we must pay attention to. Only in this way can we let the material be transferred. The use of people to achieve a better effect, if used in the wrong way, for the driver is also a certain danger, so this is something we must pay attention to.            

Vacuum stone lifter in the installation of cranes must pay special attention to safety, mechanical volume and weight are very large, if not carefully fall will cause unnecessary trouble, so do not easily try to install the crane themselves, to find professional installation staff to operate.

 A large part of the reason why vacuum stone lifter punches in operation is man-made. For example, improper operation of staff and incorrect control handle of traction crane will cause the hook to continue to rise, thus causing the said fault. In the process of repairing mechanical parts, because the machine is a large-scale machine, it will not be completely disassembled and maintained. In addition, the quality of repairing parts can not meet the requirements due to the limitations of maintenance conditions on site. In the process of maintenance, vacuum stone lifter often occurs deformation or abnormal wear after replacement because parts have not been strictly technically identified, corrected and repaired, shorten service life, advance the maintenance period of equipment, or substitute parts of some units, do not operate according to the corresponding procedures and processes, plus Inspectors do not measure or do not measure according to the regulations, and the mating clearance or performance of parts and components has changed significantly, leaving hidden dangers for the safety of equipment. A comprehensive safety inspection is required after the fittings are installed.