What should we pay attention to when using vacuum stone lifter?

 Vacuum stone lifter is an indispensable equipment in the use of stone. The function of vacuum stone lifter is mainly to ensure the assembly quality of stone mechanical products. Therefore, when using stone lifter, we must operate according to the standard assembly technology requirements of various stone mechanical products. What should we pay attention to when using it?           
 1.  In the process of using, we must do a good job of cleaning parts. The cleaning work includes: removing the residual casting sand, rust, etc., especially some important parts, and oil stain on the parts. Rust can be cleaned with diesel oil and kerosene as washing liquid, and then dried with compressed air.           
 2.  The assembly of wheels should be parallel to each other in the same plane as the center line of the axle.           
 3.  When cleaning the stone lifter, it is necessary to check whether the raceway and rolling body are corroded and whether the rotation is flexible.           
 4.  When assembling bearings, a layer of lubricant should be coated on the surface of the fittings. When assembling bearings, the non-model end should face inward, depend on the direction of the shoulder, the magnitude, direction and position of the force applied when assembling bearings should be appropriate. The rolling body of the raceway should not be stressed. It should be struck symmetrically and evenly. It should not be slammed so as to ensure that the end face is perpendicular to the shaft and prevent the installation from tilting. When assembling, if the pressure difference is too large, it should be stopped.Inspection of assembly.            
 Different stone machinery products have different operating rules and regulations, so they can not be treated equally. In the process of assembling machinery, we need to pay attention to the above problems to ensure the normal use of stone dishwashers. Stone suction cups are widely used, but few people will have a thorough understanding of the  relevant knowledge of the suction cups. Today, we will popularize one of the common stone suction cups, vacuum stone suction cups.           
 As automation equipment, we all know very well that vacuum stone lifter is a wearable product, because vacuum lifter is usually made of rubber, it is directly touching objects, so the wear and tear is very fast. It is a vacuum vulnerable part, which is why it stands out from so many stone materials.           
 Vacuum stone suction cup is easy to use, no matter what material the suction object is made of, no matter how heavy, how big the object is, as long as it is sealed, no leakage, you can use the vacuum suction cup. The usual electromagnetic chuck can not achieve this effect, it can only be used in steel, other non-metallic plates or objects can not be absorbed.           
 The material of vacuum stone lifter is pollution-free. It is particularly environmentally friendly and does not pollute the environment. It does not occur in light, heat and electromagnetic fields, and does not damage the workpiece. So many vacuum lifters are used in the food industry. Vacuum lifters are made of rubber materials. Absorbing or putting down the workpiece will not cause any damage to the workpiece. The hook-type hangers and cable-type hangers can not do, generally only used in the hardware industry. Especially in some industries, there are special requirements for the appearance of the workpiece, so vacuum lifter can only be used in handling.