​Characteristic Analysis of Vacuum Lifting glass lifter

The synthetic fiber hoisting glass lifter of vacuum hanger is made of high strength polyester, polypropylene or polyamide industrial strong filament, which is woven on industrial loom. Compared with traditional wire rope and chain hanger, synthetic fiber hanger has the following advantages:            
 1.  Protect the hanging objects so that their surfaces are not damaged.           
 2.  High strength, light weight, easy to carry and prepare for hoisting.           
 3.  Soft and easy to operate.           
 4.  No corrosion, no conductivity.            
 The manufacture and use of synthetic fiber hoisting glass lifter in Europe and America began more than 30 years ago, and now accounts for nearly 70% of the total amount of hoisting equipment. Almost all factories will use it. Some enterprises in our country began to use it more than ten years ago, and the market share is constantly increasing, and the development prospects are very broad. Synthetic fiber hoisting glass lifter is widely used in all walks of life.           
 Synthetic fiber hoisting glass lifter is divided into flat hoisting glass lifter (flat hoisting glass lifter and flat ring hoisting glass lifter) and circular hoisting glass lifter.           
 Round lifting glass lifter: It is a closed bearing core consisting of multiple strands of cluster yarn arranged in parallel and surrounded steplessly. The multiple strands of cluster yarn play a bearing role. The outer part of the sheath is a sheath woven by a loom. The sheath only plays a protective role, but not a bearing role. The circular lifting glass lifter is light and soft, and the small tonnage circular lifting glass lifter can be carried with you.
 In our daily life, we will inevitably hang several vacuum glass lifter on the wall. Vacuum glass lifter are easy to miss, but sometimes there are some  headaches, such as vacuum glass lifter can not bear too much weight, if the  load exceeds the bearing range of vacuum glass lifter, it will cause the glass lifter to fall off. Vacuum suction cups are not adhesive on the back, so they usually stick on smooth tiles or glass without leaving traces, which is very popular with everyone. But at the same time, there is also a problem, that is, because there is no stickiness, many families do not dare to load them when  they use them, and for no reason, they themselves. It will often fall off!           
 The solution to this problem is simple:           
 1.  Egg white liquid can be evenly smeared on the sucker with a cotton swab, then adhered to ceramic tile or glass, and then hung heavy objects after drying completely.            

 2. Apply some soapy water on the back of the sucker and then stick it to the wall to make it stronger.            

 3.  Strengthened suction cup can also be coated with a little skin care oil on the back of the suction cup and put on the wall for one day before use.            

 4.  Put the plastic sucker in hot water for 10 seconds and take it out. It can also play the role of reinforcing the hook.            

 5.  There is a simpler way to drop some water into the sucker and quickly stick the sucker to the plane.            

 In addition, the above two methods should be noted: when pasting, we must squeeze  out all the air on the back of the sucker, and wait for the sucker to be completely dry before normal use.