General Knowledge of Protection of Manual Glass Lifter

Manual glass elevator brings convenience to people at the same time, do not forget good maintenance, only good maintenance can prolong his service life, better service for you, the following edition will briefly introduce the maintenance of manual glass elevator!            

        1. When the resistance of the glass elevator decreases, the resistance is very  small. When the glass elevator rises, the resistance is very big. When the  glass is dirty, the resistance is very big, especially in the dusty area. After the rain, the glass is very astringent. When the glass falls, the dust is brought to the sealing strip. It's important to wash the car or clean the glass in time. Try not to make it work hard. When the resistance is high, it will reduce the number of lifts. If you are too lazy to wash your car, clean all the  glass and front windshield for a while when it is dirty.            

        2.  When using glass to lift or fall, we should pay attention to the timely release  of the switch when the glass reaches the top or the end, and do not hold it.  Many people have a habit of fear that the window is not closed properly. If the open glass is closed properly, we should try again to see if it is closed  properly. This habit is not good. We must know that it is easy to choke down often, Ma. Da, steel wire, track, etc. are all holding up. Whichever is fragile will  break first, except for the four windows which are up and down automatically.            

       3.  Spraying four glasses with instrument wax when you have time can greatly reduce  the resistance. If your car is old and the glass is not up and down as fast as  before, you can try using instrument wax spray, most of which can be restored.            

       4.  As long as we pay attention to the use, there will be no need to replace the  glass elevator. Except for quality problems, low-grade cars may need to be replaced, but we can do as little as possible to replace and protect our car.

 Glass lifter is the lifting device of automobile door and window glass. It is mainly divided into electric glass lifter and manual glass lifter. Nowadays, many car windows and doors are generally lifted by button-type electric lifting mode, using electric glass lifter. Today I'd like to introduce the performance requirements of automobile glass elevator.            

       1.  The function of the elevator is more, which makes it more widely used. The bracket of the front section of the automobile glass elevator realizes the application of more functions of the elevator. At the same time, it provides a good connection point for switching parts of the lift.            

       2.  Decrease of automobile glass: When the automobile glass elevator rises to any position, the decrease of the midpoint at the bottom of the glass should not be greater than 3 mm after the torque of the handle is removed.            

       3.  The elevator realizes the function of lifting platform, breakthroughs in the design of lifting chassis, optimizes the layout of the elevator, reduces the offset of the machine when the load moves, and effectively balances the various torques in the operation of the elevator, which is more stable.            

       4.  The lifter is also equipped with a comparatively characteristic lifting device, namely the three-dimensional rotating lifting device. The installation of this device makes it easier to adjust the elevation, position and direction during operation, and it is also easier to control the speed.