​Summary of Vacuum Glass Suspension (Vacuum Glass Suspension)

 Introduction of Equipment           
 Mainly used for the best equipment for handling glass, glass production and processing, glass curtain wall, construction site glass installation, etc. Glass suction crane is suitable for handling hollow glass, tempered glass, glass curtain wall, glass deep processing, solar photovoltaic glass workshop glass transfer, etc. The sucker can rotate 360 degrees electronically and turn 90 degrees electronically. The sucker hanger is an ideal tool for carrying flat glass. A variety of structural suckers can be configured and lifting weight can be designed and manufactured according to the special needs of customers with a maximum lifting weight of 3000KG.           
 Working Principle of Vacuum Hanger           
 Vacuum is generated by pumping air from the sucker and 1 kg/cm is pumped out;  (950-1050 mbars) atmospheric pressure. Therefore, the suction cup extrudes the workpiece under pressure of 1 kg/cm. We can get 10,000 kg of pressure on a 1 m vacuum sucker. This physical fact leads to a very effective handling system.           
 There are at least four main advantages of using vacuum hangers:           
 1.  Fast operation speed           
 Vacuum energy is stored in a vacuum accumulator, which can be transmitted to the  sucker in one second and absorbed instantaneously. Within two seconds, the vacuum in the sucker can be returned to a atmospheric pressure and released instantaneously.            

 2.  Safe adsorption, no damage to material surface           
 Vacuum  hanger mainly relies on the vacuum source to produce vacuum in the air inside  the suction cup. Generally, the material of the suction cup is silica gel, natural rubber, nitrile butadiene rubber, etc. It can complete the non-damage  handling or feeding of materials such as plate, glass and so on.            

 3.  Safety of use           
 The vacuum of the hanger usually comes from the accumulator. In case the vacuum pump is powered off, the energy reserve can hold the load for several hours. Vacuum is controllable. Sensors can show the system in case of leakage and load release. As long as the suction cup has a proper vacuum load, it will not fall. It's just a physical  law.            

4. Saving time, effort  and cost           
 The use of vacuum hangers can reduce the number of employees in storage areas. Absorption and release can be accomplished by only one person: the driving operator. In any case, it is possible and necessary to reduce the number of workers engaged in hard and dangerous work.           
 Because the vacuum device is moved very fast, the cost savings exist in the speed. Our vacuum handling system does not leave any trace on the product, so it can handle materials that need to be handled carefully.            

 5.  Easy to operate           
 Because the operation of the vacuum hanger is above, it becomes easier to grasp, put down and release. This is also one of the main advantages of using vacuum hangers to carry things.           
 Vacuum hangers are generally used in:         
 1.  Transportation of iron plate, aluminium plate, steel plate and stone plate and feeding of laser cutting machine.           
 2.  Handling of all kinds of glass.           
 3.  Handling and feeding of iron, steel and aluminium coils           
 4.  Handling and feeding of iron and steel pipes           
 5.  Handling and feeding of concrete prefabricated parts           
 6.  Suitable for other materials with flat surface and regular shape.