​Turn-over vacuum glass hanger (vacuum glass hanger)

Turn-over vacuum glass hanger (vacuum glass hanger)
 There are at least four main advantages of using vacuum hangers:            

 1.  Fast operation speed           
 Vacuum energy is stored in a vacuum accumulator, which can be transmitted to the sucker in one second and absorbed instantaneously. Within two seconds, the vacuum in the sucker can be returned to a atmospheric pressure and released instantaneously.            

 2.  Safe adsorption, no damage to material surface           
 Vacuum hanger mainly relies on the vacuum source to produce vacuum in the air inside the suction cup. Generally, the material of the suction cup is silica gel, natural rubber, nitrile butadiene rubber, etc. It can complete the non-damage handling or feeding of materials such as plate, glass and so on.            

 3.  Safety of use           
 The vacuum of the hanger usually comes from the accumulator. In case the vacuum pump is powered off, the energy reserve can hold the load for several hours. Vacuum is controllable. Sensors can show the system in case of leakage and load release. As long as the suction cup has a proper vacuum load, it will not fall. It's just a physical  law.           

 4. Saving time, effort and cost           
 The use of vacuum hangers can reduce the number of employees in storage areas. Absorption and release can be accomplished by only one person: the driving  operator. In any case, it is possible and necessary to reduce the number of workers engaged in hard and dangerous work.           
 Because the vacuum device is moved very fast, the cost savings exist in the speed. Our vacuum handling system does not leave any trace on the product, so it can handle materials that need to be handled carefully.            

 5.  Easy to operate           
 Because the operation of the vacuum hanger is above, it becomes easier to grasp, put down and release. This is also one of the main advantages of using vacuum hangers to carry things.            

 Vacuum glass hangers are generally used in:           
 1.  Transportation of iron plate, plate, steel plate and stone plate and feeding of laser cutting machine.           
 2.  Handling of all kinds of glass.           
 3.  Handling and feeding of iron, steel and coils           
 4.  Handling and feeding of iron and steel pipes           
 5.  Handling and feeding of concrete prefabricated parts           
 6.  Suitable for handling all kinds of materials with smooth surface and regular shape.   

 II. Selection of Vacuum Glass Hanger           
 The selection of vacuum glass hanger is based on the size, material and weight of materials to be transported. Different materials need different materials of suckers. For example, the general choice of rough material surface is to use silica gel or polyurethane suction cup, in addition to the sponge suction cup lip, to ensure that the suction cup can safely adsorb. Natural rubber or nitrile-butadiene rubber suckers are generally used for smooth surface materials such as glass. According to the temperature, humidity and material temperature of the working environment of the hanger, the material selection of the sucker will be affected.           
 The most easily damaged parts of vacuum hanger are vacuum sucker, vacuum pump, pressure gauge, etc. After these main parts are damaged, it is better to find  the original equipment supplier to replace them. Maintenance of suckers and vacuum pumps can prolong the service life of hangers.           
 III.  Manufacturers of Vacuum Glass Hangers           
 Vacuum hangers are imported from abroad. Domestic enterprises have developed a lot of hanger products which conform to the use habits of Chinese factories on the basis of foreign advanced technology. Among them, many vacuum handling experts such as Shanghai Wake Automation Equipment Co., Ltd., Shanghai Youlebot  Automation Engineering Co., Ltd., Tianjin Weishi Automation Equipment Co., Ltd. have made good attempts. The GLA, CLS and other special hangers developed by the company are widely used in the fields of production, processing and logistics.