Correct operation method of vacuum glass lifter (vacuum glass lifter)

 Vacuum suction cup is the most common component in vacuum system and the most widely used one in industrial automation. However, how much do you know about a familiar vacuum suction cup that is closely related to us? Do you know the process of vacuum glass lifter application?
 Vacuum suction cup is a vulnerable part in vacuum system because the material of suction cup is made of rubber, which needs to be replaced for a period of time. In use, the suction cup mouth contacts with the surface of the workpiece to form a closed space, thus maintaining the pressure difference inside and outside the suction cup, and then adsorbing and grasping the workpiece. The connecting end of the suction cup is usually connected with the hose and other parts of the vacuum system through a metal structure (metal fittings) to achieve the purpose of forming a vacuum.

1. Classification of vacuum glass lifters:

When we design and match glass lifters, we often need to consider the overall structure of glass lifters and tools. The metal fittings of the suction cup are divided into fixed type and spring type. The metal fittings have vertical and vertical interfaces. The suction cup itself is divided into flat suction cup, corrugated suction cup and some special suction cups.

2. Vacuum Generation in Vacuum Glass lifter System
 Two methods are commonly used to establish vacuum:
 A.  Vacuum pumps
 B.  Vacuum Generator
 Generally speaking, if the number of vacuum glass lifters is not very large and the diameter of glass lifters is not very large, it is more economical to use jet vacuum generator to produce vacuum. Because the jet vacuum generator itself needs compressed air to produce vacuum, it does not need to assemble other vacuum pipes.
 If the vacuum consumption is relatively large, such as color picture tube manufacturing enterprises, the use of vacuum pumps is more reasonable.

Selection of Vacuum Fittings for Vacuum Glass lifter

3. The most common way of vacuum generation for vacuum components is jet vacuum generation. The way of vacuum generation should be based on the diameter and number of vacuum glass lifters to select the vacuum generator or vacuum pump. After the mode of vacuum generation is determined, the following essential components are needed to form the vacuum glass lifter mechanism: vacuum glass lifter + (vacuum switch + vacuum filter + vacuum generation + vacuum damage valve + vacuum regulator + vacuum cylinder)

 To sum up, the selection of vacuum suction cup accessories is a complete vacuum system, suction cup can work for us 24 hours in the project normally, and replace manual grasping, especially when grasping some corrosive and toxic objects.

Characteristics of corrugated vacuum glass lifter
 1.  Suck up and hold the smooth and smooth workpiece.
 2.  Silicon sucker, which can be used in food processing industry
 3.  Corrugated suckers can be used to meet the requirements of uneven, curved and inclined surfaces.