​Electronic bench scales each item inspection

Electronic bench scales each item inspection
 Automatic reset detection of electronic bench scales:
 1.  We can take off the carrying instrument and add a weight, and then set it to zero.
 2.  Remove weights again, wait for at least 5 seconds and then make the zero setting device automatically, and then test whether the zero setting system is in progress.
 3.  Do the operation of 2 again and keep operating until the electronic bench  scales reset system cannot reset.
 4.  We calculate the total number of weights we have placed before, and the final  data is the range of automatic zeroing.
 5.  Finally wait for the data report.
 This is only suitable for electronic bench scales return to zero system, for electronic truck bench and other products are not suitable. The following is also about the preheating time test of the electronic platform bench. We must make a preparation before the test, that is, we need to cut off power for at  least 8 hours before starting the test. Then connect the power supply of the electronic bench scales to start whether the preheating value as told by the manufacturer is the same, whether it meets the requirements. The electronic bench scales must be reset to zero before the test. According to the zero error value, the first error value must be recorded as Eoi during the first operation, and then the error is recorded as Eo. The error can be truly determined only after the maximum load is approached.
 When making the verification, the error value for the first time should not be  greater than ±0.25d, and should not exceed the maximum allowable error specified in the first time. If the error is larger than the first error, it is wrong. So we do a few more checks, can learn a lot of loopholes, as long as the timely adjustment, so that the damage to the electronic bench scales will not be so great.
 So we have to do a good job for the electronic balance balance and other weighing products is to maintain the use of electronic balance, in many cases also want to pay more attention to the instrument whether there are some strange, in the use of whether there will be trouble and other problems, more timely maintenance, so as to use the electronic balance for a long time.
 Electronic bench scales in the industry use probability is very large, so in the electronic bench industry each enterprise is the electronic bench scales as the main product. Because the electronic bench scales in the commercial and industrial are applicable, the performance of all aspects are very good. However, electronic products will inevitably have some problems during use, buyers must know how to maintain the products.
 First of all, we should pay attention to the choice of the sensitivity of the electronic bench scales. If the sensitivity is not high, it may directly affect the accuracy of the electronic bench scales at weighing. In general, the electronic bench scales we buy is of course the higher the sensitivity, the better, when the sensitivity is high, when measuring the output signal will be faster and larger. Secondly, we need to pay attention to the precision selection of electronic bench, precision is actually an important performance index of electronic bench scales, which is directly related to the important link of the measurement system. The higher the precision of electronic bench scales, the higher the price, which is the same for the general electronic bench scales. There is the stability of electronic bench scales is also very critical, so when choosing electronic bench scales we need to pay attention to not only the price and quality, but also a lot of details.