​The way to prolong the life of electronic crane scales

The way to prolong the life of electronic crane scales
 When it comes to electronic crane scales believe that we are not unfamiliar, with the wide application of electronic crane scales, more and more people mentioned how to make electronic crane scales life extension? In fact, it is very simple to extend the service life of electronic crane scales, as long as we usually pay attention to the maintenance and maintenance of electronic crane scales on the line. Both human beings and mechanical equipment need to be maintained, if people do not maintain for a long time, they will get old, so will mechanical equipment.
 1, As far as possible to reduce the electronic crane balance collision. Even if the sensor of lifting weight adopts anti-collision limit measure, the excessive collision force will damage the sensor and affect the measurement degree of electronic scale.
 2. Regular maintenance. Due to the use of electronic crane scales and the impact of environmental and device aging, accuracy may change. It shall be periodically verified according to the requirements of national metrological technical laws and regulations. It cannot be used without verification or beyond the effective date of verification.
 3, Reduce the impact of wind vibration, vibration and wind power will make the crane weight show the digital jump.
 4, Prevent electronic crane scale by violent swing and knock
 Electronic crane scale inside many electronic components, such as integrated circuit, quartz crystal, sensors, when electronic crane scale were dramatic knock against, can damage the components and the formation of electronic scale, affect the accuracy of the affect normal use, and other items to prevent scale body knock against, or falling from high  up in the air, appearance to should take put down gently, don't put randomly, to prevent unnecessary loss, appearance is fixed on the crane should adopt when using vibration method, to avoid affect the firm sex.
 5. Do not dismantle the spare parts on the scale
 In the normal use of electronic crane scales, do not arbitrarily disassemble the components on the electronic scale, do not open the seal on the sensor, open the appearance of the integrated circuit and other components, necessary repair, it is necessary to guide the relevant technical personnel or have a certain repair common sense, in case of fault expansion.
 If there is a fault in the formal hoisting, it is necessary to report it to the commanding personnel in time. No operator or construction personnel can leave their posts without permission before receiving any orders from the commanding personnel. When the lifting heavy objects are in place, it is forbidden to remove the locks for lifting.
 Meanwhile, it is forbidden for related staff to lift or lift the lifting equipment and lifting machines. At the same time, the corresponding warning mark should be made within the working scope of its hoisting, and non-staff members are forbidden to enter and exit within this scope. In addition, when the wind speed of the hoisting work has reached level 6 on the day, the wind speed of the hoisting work of large equipment must not be higher than level 5 in strict accordance with the relevant provisions, that is, the hoisting work is prohibited. And in thunderstorms, fog days are also prohibited hoisting.\