​How to use the wireless electronic crane scale

Keyword:wireless electronic crane scale   Time:2019-11-13 9:58:22

 We should be very careful when using the wireless electronic crane scale, master the correct use method, so as to ensure the user's safety, then how to use the wireless electronic crane scale correctly? Let me give you a detailed introduction.
 one, wireless electronic crane scale before use, should be the corresponding battery into the scale body and handheld device or change the battery, need to tighten the battery clamp lock screw, check whether the battery clamp is firmly fixed on the scale body, and then the crane scale door closed lock, to prevent accidents. When the meter shows low voltage, the battery pack should be replaced immediately and the replaced battery should be charged in time to prevent battery damage. When the battery pack is not in use for a long time, it should be recharged at regular intervals. The battery should be stored in a dry, ventilated and temperature appropriate environment, and prevent contact with corrosive substances. When loading and unloading battery pack connection line aviation socket, do not use the hand to grasp the clamp wire cap clamping wires, and should grasp the base, on the other side of the transmitter on the aviation plug also do not grasp the clamp wire cap, should grasp the head of the rotating cap loading and unloading, prevent the power connection loose, cause trouble. Before the transmitter is connected to the power supply, the antenna and its feeder must be connected reliably, otherwise the transmitter will be damaged.
 Second, prevent the wireless electronic crane scale from violent pull (and many collision electronic crane scale internal electronic components, such as integrated circuit, quartz crystal, sensors, monitors, etc., when there is intense collision of electronic crane scale, can damage the components, electronic scale caused by fault, affect accuracy so as to affect the normal use, and other items to prevent scale body collision or falling from high up in the air, instrument to should take put down gently, don't put randomly, to prevent the loss of don't want to, instrument fixed on the crane should be taken when using vibration reduction measures, so as not to affect the reliability.
 Three split arbitrarily, but parts of wireless electronic crane scales, wireless electronic crane scale, normal use don't assemble the parts on the electronic scale, more do not open the sealing mouth of the sensor assembly instrument on the integrated circuit components, such as the necessary repairs, required in under the guidance of relevant technical personnel or have a certain knowledge of maintenance, after in case of failure to expand.
 In addition, in order to ensure that the wireless electronic crane scale can work, the machine should carefully check the motor fasteners, parts are flexible rotation, and ensure that the motor in a stable, no impact, small vibration, no leakage of oil environment.
 Wireless electronic crane scale is widely used in our daily life, so what is the reason of using wireless electronic crane scale using claw hook?
 1.The claw hook connects the sensor directly, the structure is simpler, reduces the production cost. Ring hook although the structure is relatively simple, but between the use of shaft pin connection, virtually increased the cost.
 2.There is usually a connecting device between the eye hook and the sensor, which is connected with the sensor through threads. Practice shows that the thread connection is usually the weakest link in the whole crane system. You don't have to worry about that with a claw hook.
 3. Use more convenient, save manpower and material resources, improve work efficiency.

Crane Scales.jpg

Ramhoist News
  • No information
Ramhoist FAQ