Main use and operation points of double - sided electronic crane scale

Main use and operation points of double - sided electronic crane scale

 Do you know the main use and operation points of double-sided electronic crane scales? Here's a look:

 1. A charge can be normally used for about 150 hours

 2. Nickel-plated hook ring, rust and clean.

 3. Steel structure shell, special anti-corrosion technology.

 4. High strength hook ring, safe and reliable.

 5. Rain and dust proof structure, indoor and outdoor use.

 Key points for operation of double-sided electronic crane scale:

 1. Please select the appropriate rotary ring according to your needs, do not exceed the rated load, and the rated load is engraved on the rotary ring;

 2. Tap the screw hole on the workpiece to make the lifting ring bolt vertically installed on the surface of the workpiece. The threaded hole should be drilled and sunk to avoid swelling of the top grain when the lifting ring is twisted.

 3. The surface of the workpiece must be flat, so that the ring washer and the surface of the workpiece all contact, no gap between;

 4. Do not add a cushion between the ring washer and the workpiece surface;

 5. After installation, the side of the u-shaped bolt of the lifting ring shall not  touch the object being hoisted or other objects;

 6. When lifting, apply load at a uniform speed and gradually increase the force. Do not apply impact load and vibration load;

 7. When VIPC rotates the lifting ring, the bolts of the lifting ring may loosen gradually, so the torque must be adjusted again; Regularly check and tighten  the bolts to the recommended torque of the iron man machine;

 8. Special bolts and nuts must be used for side pulling rotary rings;

 What should we pay attention to in the use of double-sided electronic crane scale? Now let's take a look at the use of double-sided electronic crane scale safety precautions:

 1. The weight of the weighed article shall not exceed the maximum z range of the electronic crane scale.

 2. The shackle (ring), hook and shaft pin of the crane object of the electronic crane scale shall not be stuck, that is, the contact surface in the vertical direction shall be at the central point, and the contact shall not be stuck in the two sides, which shall have full freedom.

 3. When running in the air, the lower end of the crane object shall not be lower than the height of a person. The operator should keep a distance of more than 1 meter from the crane object.

 4. It is strictly prohibited to lift objects with slings.

 5. Ladle lifting by crane is a high-altitude operation. It is difficult for ladle supporting ear to fall into the supporting seat of electronic crane scale.

 6. In the actual use of the site, the ladle is generally not covered, double-sided electronic crane scale installation position temperature is very high, up to about 200℃.

 7. When not working electronic crane scales, rigging, lifting fixture is not allowed to hang heavy, should be unloading. Prevent the parts from deformation.

 The above seven aspects are about the double-sided electronic crane scale in use should pay attention to the matters, hope to provide help to you in use.