Convenient 500kg self loading electric pallet stacker price

Standard for Safe Operation of  All-Electric pallet stacker
 1.  All-electric pallet stacker truck operators are not allowed to drive after drinking, overweight or overspeed, and to brake or turn sharply. All-electric pallet  stacker trucks are not allowed to enter places where solvents and flammable gases are stored.           
 2.  Safety devices of all-electric pallet stacker trucks are mandatory and complete, the parts are smart and useful, and the skills and functions are  excellent. It is strictly forbidden to drive with illness. Usually, it is necessary to take necessary shelter for all-electric pallet stacker trucks, and to inspect all parts carefully.           
 3.  Keep the scale driving form of all-electric pallet stacker truck, fork is 10-20 centimeters off the ground when it is running off the ground, fork is lowered to the ground height when all-electric pallet stacker truck stops; when it is running in poor road conditions, its component is suitable to be reduced, and  the driving speed of all-electric pallet stacker truck should be lowered.           
 4.  If the electronic controller runs out of control, the total power supply will be disconnected in real time.           
 5.  In the use of all-electric pallet stacker truck, special attention should be paid to real-time charging of batteries and accurate shelter of batteries. When charging batteries, we should pay attention to the steps, not only to make the batteries full of electricity, but also not to overcharge them; when the batteries are in a state of power shortage, we should strengthen the batteries several times, and then we might as well restore the normal state; we should often check whether the distilled water of the batteries is full or not, and increase it in real time when the batteries are not full. Add distilled water.           
 6.  In the operation of all-electric pallet stacker truck, although less use and long-distance acceleration, when all-electric pallet stacker truck starts and the speed increases, the acceleration pedal will be stabilized. If the road condition is better, the pallet stacker truck will continue to accelerate. When the pallet stacker truck needs to be delayed, it is easy to speed up the pedal and pedal the brake pedal lightly. This can make full use of the delayed energy. If the all-electric pallet stacker truck has the new braking function, the kinetic energy of the delayed time can be received. When the vehicle is out of date under the ramp, don't disconnect the electric circuit of the driving motor of the all-electric pallet stacker truck, step on the brake pedal slowly, make the all-electric pallet stacker truck run in the new braking mode, use the kinetic energy under the vehicle, and reduce the energy consumption of the battery.           
 7.  In the operation of all-electric pallet stacker truck, do not mistake the "progressive and backward" orientation switch as a steering switch. Unless the demand is urgently delayed, don't put the brake pedal directly in the end. In the process of vehicle application, the battery should be charged as soon as possible in order to avoid excessive discharge of the battery.           
 8.  In the operation of all-electric pallet stacker truck, do not always adopt critical braking during high-speed driving; otherwise, it will become a huge conflict between the brake assembly and driving wheel, reduce the service life of the brake assembly and driving wheel, and even damage the brake assembly and driving wheel.           
 9.  When the all-electric pallet stacker truck is not in use, please place the fork at the lowest place to prevent the cylinder piston rod from being exposed and rusted in the air for a long time; the driving wheel and front wheel should be guaranteed not to be surrounded by debris and other debris; and the power supply should be kept in a closed form.