Wholesale Semi Electric Hand Pallet Truck/Jack Fork Lifter Traspaleta Electrica

Keyword:Electric Pallet Trucks   Time:2019-11-4 0:17:48

Common Faults and Solutions of Electric Pallet truck
 Regardless of any logistics machinery and equipment, there will be more or less some faults in the regular working state, which will affect the use and work of everyone. With nearly 20 years of production experience and accumulated experience in maintenance, RAMHOIST summarizes the following common faults and solutions of electric pallet truck. Method:           

The speed of the driving wheel suddenly decreases in use.           

Reasons: 

  1. The battery voltage is too low or the resistance at the junction is too high.          

  2. The gearbox of the drive head and the associated bearings are short of lubricant.          

  Resolvent:            

 1.  Check the load voltage and clean the joint.           
 2.  Check the lubricating oil, clean it and refill it with new lubricating  oil.           
 2.  Brake failure             

 Reasons: 

 1. Brake loosening or falling off or excessive clearance between brake  pads           

 2. Short circuit may occur inside the disk coil of the brake.            

 Resolvent:            

 1.  Re-install the brake and adjust it.           
 2.  Replace a new disk coil.           
 3.  When lifting a heavy object, it is weak or unable to rise.            

 Cause

 1. Oil leakage in hydraulic system pipeline.           

 2. The speed of motor rotation of hydraulic oil pump is too low.            

 Solution: 

 1. Find the pipeline of oil leakage and handle it well.           

 2. Check the drive motor and solve the problem.           

Correct Operating Matters of Electric pallet Truck           
 Using electric pallet truck in accordance with the standard method can prolong the life of the vehicle and effectively improve the efficiency of operation. With nearly 20 years of production and after-sales experience, RAMHOIST has analyzed the operation precautions of using electric haulage trucks for its customers.             

 1.  Batteries are the power source of vehicles. They should be charged and maintained in time. It can not be recharged when there is no electricity or when the electricity is too low, nor can it be overcharged for a long time, so the damage to the battery will be greater.           

 2.  Before use, the operator should be familiar with the condition of the vehicle and should not let the operator operate at will.            

 3.  The vehicle can not be accelerated for a long time and a long distance.            

 4.  Slow down before starting, slow down for a few seconds and then speed up.           

 5.  In the course of driving, we must not mistake the direction buttons of "forward" and "backward" as steering buttons.            

 6.  It is forbidden for vehicles to carry people on board.            

 7.  When turning, we must observe the surrounding environment and drive slowly.           

 8.  It is strictly forbidden to use in blind areas.           
 9.  It is strictly forbidden to overload or partial load goods.           
 10.  It is necessary to ensure that the fork of the truck is fully inserted into the bottom of the pallet before lifting.           
 11.  Quick descent and unloading are strictly prohibited during unloading.           
 12.  When the electric transporter is not in use, the fork should be lowered to the bottom and stored in a prescribed place, which can not affect other operations.

Electric Pallet Trucks Supplier in Nan Jing, China.jpg

Ramhoist News
  • No information
Ramhoist FAQ