Lithium battery operated mini electric pallet truck 1.5ton 2.0ton

Keyword:Electric Pallet Trucks   Time:2019-11-4 0:59:23

Guidance for pallet truck Work Procedure Specification
 I.  Working procedures:
 (1)  Qualification requirements
 Pallet truck drivers must be trained by the labor department and obtain a pallet truck driving operation permit before they can be on duty. Driving pallet truck trucks without witnesses is strictly prohibited.
 (2)  Pallet truck drivers are not allowed to teach others to drive pallet trucks without the approval of the department.
 (3)  Before driving, check whether the steering lights, brakes, horns, headlights and mirrors are in good condition; whether the forks are bent, damaged and cracked.

 Check whether the brake fluid is leaking.
 II.  Driving Regulations
 (1)  Pallet truck operators must wear safety helmet for operation.

 (2)  Those who use pallet trucks must use special keys for pallet truck trucks. After starting, they are not allowed to dial out the keys, let alone use other non-pallet truck keys to start the pallet trucks, so as to avoid damaging the locks of the trucks.

 (3)  When a pallet truck starts, pay attention to whether there are other vehicles, pedestrians or obstacles around it; when turning, look at the rearview mirror and the situation on the left and right sides, turn on the indicator lights, drive slowly and sound the horn; when reversing, look at the rearview mirror and look back at the situation first, and no obstacles can drive.

 (4)  When starting a pallet truck, each start shall not exceed 5 seconds, and the second start shall be more than 10-15 seconds. If the third successive start is unsuccessful, the pallet truck shall be restarted at 5 minutes interval. When starting in winter, it should be preheated before starting. If the above operations can not be started, maintenance personnel should be notified to deal with them in time to avoid battery damage.

 (5) Pallet trucks should be driven in the direction of "right-up-left-down". Pallet trucks should slow down and honk at the entrance and exit. When driving, you must concentrate and not paralyze carelessness.

 (6)  Vehicles and road edges should be kept at a certain distance to ensure safety. Pallet trucks are loaded with materials. When driving downhill, the truck should be reversed and the speed should be controlled properly. Drive slowly up and down the slope.

 (7)  When driving,  the fork should be 200-300 mm away from the ground. It is not allowed to raise or lower the cargo during the driving. It is not allowed to brake or turn at high speed.

 (8)  Comply with the speed limit stipulated by the factory, the speed shall not exceed 5 km/h, and speeding shall be strictly prohibited in order to ensure safety.

 (9)  Slow down and honk at intersections or other invisible places; slow down when driving on wet and uneven ground and turning; avoid sharp turns and driving on unstable surfaces.

(10)  When parking in transit, the brake must be pulled up and put in neutral gear to leave the pallet truck.

(11)  Pallet trucks should pay attention to the height of the structure at the entrance and exit of the pallet truck. They should not blindly enter or leave the pallet truck.

(12)  When driving, the general personnel shall not sit beside the pallet truck driver for non-business needs, let alone be used for transporting people or other work unrelated to the pallet truck operation.

(13)  Pallet truck circuits such as batteries shall not be connected in workshops or dangerous goods warehouses without authorization in order to avoid sparks.

(14) Overloading is strictly prohibited.

Expert Manufacturer of Electric Pallet Trucks.jpg

Ramhoist News
  • No information
Ramhoist FAQ