1 D Ring Fall Protection Safety Harness EN361 equipment for fall arrest working at height

Keyword:Fall Arresters   Time:2019-11-8 16:01:22

The Principle of fall arresters and Two Classical Application Examples

 Use of fall arresters: With the development of science and technology and the progress of society, the contents of protection of high-altitude operation, deep well operation and high-tech industry fall become more and more frequent, and accidents also occur continuously, which puts forward more stringent requirements for the safety protection measures of high-altitude workers in the process of operation. Ask. As far as the existing technology is concerned, the fall arrester is one of the most suitable safety measures.           

 Principle of Fall arresters:The speed difference auto-controller uses the speed difference of falling objects to control itself. Its safety rope (steel rope) has been in a tense state, so that the workers who are working at high altitude can avoid the danger of accidental death from falling at high altitude. Use of high-altitude fall arresters: In power operation, in many cases, it is necessary to climb the first tower of high-voltage transmission line. In order to ensure safety during climbing, track-type fall arrester is mainly used in foreign countries. It is necessary to install tracks on each tower. When using, it is necessary to slide safely on the track through the fall protection of speed difference fall arresters. Achieve the safety goal of preventing falling from high altitude.The fall arresters for high-altitude operation of electric power is this kind  of fall arresters.Therefore, market-oriented, in recent years, fall arresters manufacturers have sprung up like bamboo shoots.            

 Few people know that the pre-baked anode technology requires that carbon blocks be roasted at 1100-1200 C to remove volatile matter, coke asphalt and improve the mechanical strength and electrical conductivity of products, so the non-baked anode after moulding is called raw anode.The manufacture of raw anode is an important link in the production of carbon anode. The manufacturing process of raw anode refers to the crushing or grinding of carbon raw materials into different particle sizes, mixing with liquid asphalt in a certain proportion to form a plastic paste, then extruding or shaping by vibration, and finally producing carbon blocks with a certain strength and density. However, when the raw anode is covered with filling material after charging, a large amount of dust will rise. The function of the dust collecting tube of the multi-function crane feeding tube of the anode is to collect the raised dust and prevent environmental pollution. Dust collecting pipe is composed of fixed pipe and movable pipe.During the process of dust collecting, a part of granular material enters into the gap between the two pipes, which causes blockage when  the movable pipe is running. If the crane or the paving pipe shakes, the movable pipe of the dust collecting pipe will suddenly fall down and cause damage to the dust collecting pipe. In view of this, the fall arresters  manufacturer suggests that customers in the industry use the differential fall  arresters as an fall arresters of dust collecting tube for multi-functional overhead crane laying tube with aluminium anode.            

 As we all know, in the process of high-altitude operation such as oil testing and oil well minor repair, such as wearing hoisting rope, handling rope jumping on the crane, maintenance and lubrication crane, etc., all belong to the category of high-altitude operation. In order to achieve the safety goal of preventing high-altitude falling, it is required that the anti-falling brake should be used correctly every time the derrick goes up and down, for short. Fall preventer. Hang it in an appropriate position at the top of the derrick on one side of the derrick ladder, the wire rope used for protection automatically shrinks into the protective box when not in use, pulls it out with nylon rope when in use, connects it with special fasteners and D-ring on the back of the safety belt worn by workers, and when the derrick worker goes up and down the derrick, his hand is not firmly grasped or high. When falling occurs due to instability of standing, it plays a protective role in falling.

China Fall Arresters OME Manufacturer1.jpg

Ramhoist News
  • No information
Ramhoist FAQ