Universal safety harness fall protection full body harness for fall arrest capacity 140 kgs

Keyword:Fall Arresters   Time:2019-11-8 17:01:56

Cautions for Use of Fall arresters

 It is recommended that you wear fall arresters for tilting operation, in principle, the tilt should not exceed 30 degrees. If the tilt is above 30 degrees, you must consider whether it can impact the surrounding objects.           
 The key parts of the fall arresters have been specially treated for wear resistance and corrosion resistance, and have been strictly debugged without adding lubricant.           

 Safety rope twisting is strictly prohibited. Disassembly and refitting are strictly prohibited. It should be kept in a dry and dusty place. The precautions before the use of the purchased fall arresters are as follows: due to environmental conditions or the presence of harmful substances, the chemical resistance of the material selected for the use restriction of the fall arresters; temperature restriction; sensitivity to cutting and wear; degradation caused by ultraviolet radiation, the fall arresters obtains the manufacturer's certificate before its first use; Obtain guidance and training. Before each use of the fall arresters, it needs to check the procedure; whether there is a label, whether the label is clear; scrapping criteria.           

 In the process of steel structure operation, workers need to use anti-falling safety device when working at high altitude within a certain range, which can effectively realize the function of falling protection.           
 Specifically, in the installation of steel structure, this kind of fall arresters can effectively avoid the damage caused by falling in climbing operation by cooperating with safety belt.           

 The fall arrester is installed at the upper end of the structure. The rope is connected with the safety rope of the fall arresters. When people use the rope, they slowly drop the fall arresters wire rope, hang the safety belt and then climb.           
 At  present, the safety device of fall arresters has been widely used in the climbing passage of tower crane in order to prevent falling at high altitude. In addition, this kind of fall arresters can also be used in high-rise building's frontier operation.        

 Key points of prevention and control of falling accidents in suspension work: strengthening construction plan and cooperation of various construction units and types of work, making full use of safety facilities such as scaffolding to  avoid or reduce operation in suspension work; operators should be more careful to avoid excessive exertion and body instability; workers in suspension work must wear soft bottoms to prevent sliding. Shoes, at the same time, should use the seat belt correctly; the body is sick or overtired, mental retardation, etc. should not be engaged in suspension work at high altitude.           

 The key points of prevention and control of roof eaves fall accidents are that workers should wear soft-soled anti-skid shoes; roof slopes greater than 25 degrees should take anti-skid measures; roof operations should not move backward to the  eaves; using external scaffolding construction, the outriggers should be 1.2m higher than the eaves, and hang safety nets, and the eaves should be covered with feet. Hand board; without using external scaffolding, safety net should be set under eaves.

Competitive Fall Arresters China Supplier1.jpg

Ramhoist News
  • No information
Ramhoist FAQ