Double lanyard Safety Harness fall arrest protection equipment

Overview of the Use of Fall arresters

 1.  When using the fall arresters, it should be suspended on the structure with strong and blunt edges above the user.            

 2.  The safety rope and appearance should be checked before using the fall arresters, and the safety rope should be locked 2-3 times. When pulling the safety rope out at normal speed, it should make "click" and  "click". When pulling the safety rope vigorously, it should be able to lock. When loosening hands, the safety rope should be automatically recovered into the device. If the safety rope can not be fully recovered, just pull out some safety ropes. Stop using if there is an exception.            

 3.  When using fall arresters for tilting operation, in principle, the tilt should not exceed 30 degrees. If the tilt is above 30 degrees, it must be considered whether it can impact the surrounding objects.            

 4.  The key parts of the fall arresters have been specially treated for wear resistance, corrosion resistance and so on. After rigorous debugging, no lubricant is needed in use.           

 5.  Safety rope twisting is strictly prohibited. Disassembly and refitting are strictly prohibited. It should be kept in a dry and dusty place.            

 Safety fall arresters uses the difference of falling speed to control automatically, high hanging and low using.            

 When using the fall arresters at high altitude, it is necessary to cross the nylon suspension rope over the structure with strong and blunt edges above, and hook the iron hook on the nylon rope onto the "n" ring.            

 The iron hook on the wire rope can be used by hanging it into the semi-circle of the safety belt.            

 However, we should remind you that there is no need to change the suspension point within the radius of the safety fall arresters.            

 In normal use, the safety rope will flex freely with the human body. Under the  action of the internal mechanism of the fall arresters, it is in a semi-tense  state.The internal locking system of the high-altitude fall arresters is a very important automatic locking system.            

 The pull-out distance of the safety rope is not more than 0.2 meters and the impact force is 2949N. Therefore, the safety of the staff who lost their feet can be fully guaranteed by the fall arresters.            

 When you receive our crash preventer, don't rush to use it, first check the safety and reliability of the crash preventer.            

 Let's explain the safety detection steps of the high-altitude crash preventer and the matters needing attention.            

 First of all, the first thing to do is to observe the safety rope of the safety fall arresters, whether there are obvious scars and shortcomings in its appearance. And the test lock 2-3 times, if there is no abnormal can be put into use, if  the test lock process, there is a carton, or the safety rope does not retract, this safety fall arresters can never be put into use, you can immediately send back to the manufacturer, we will help you repair or replace.