Ram News
-
How to Store Vacuum Stone lifter for a Long TimeTime:2019-10-29 15:42:00
-
Construction of Lifting and Positioning of Stone lifterTime:2019-10-29 15:40:21
-
Relation between New Growth Capacity and Total Balance of Vacuum Stone lifterTime:2019-10-29 15:39:16
-
How to deal with and budget the purchase of stone liftersTime:2019-10-29 15:38:18
-
Selection Conditions of Vacuum Stone lifterTime:2019-10-29 15:37:04
-
Maintenance Measures of Vacuum Stone lifter in Low Temperature EnvironmentTime:2019-10-29 15:36:00
-
Description of Load by Vacuum Stone lifter and Composition of ManipulatorTime:2019-10-29 15:34:46The vacuum generator used by vacuum stone lifter manufacturers is rubber suction cups or foam suction cups. The material can be silica gel, fluorine rubber or foamed rubber, nitrile rubber or natural rubber. There are man…
-
Cautions for Operation of Vacuum Stone lifter in Special EnvironmentTime:2019-10-29 15:33:462. Shock and vibration: The impact on vacuum components should be 150 m/s. Below, the vibration should be 40m/s. Following. If this value is exceeded, it will cause erroneous action.
-
High temperature of vacuum stone lifter is easy to cause shrinkage problemTime:2019-10-29 15:32:45Today, we will discuss the shrinkage problem of vacuum stone lifter when its temperature is too high. As most stone lifter engineers know, it is easy to shrink when its temperature is too high. Usually, they like to redu…
-
Vacuum stone lifter can not work properly without suctionTime:2019-10-29 15:30:542. Place the substrate to be coated flat on the coating base and turn on the vacuum pump switch to the adsorption position. At this time, the coating substrate is absorbed on the coating base. 3. Place the …