Ram News
-
What is the reason for the high temperature of the vacuum stone lifter?Time:2019-10-29 15:14:04Sometimes, the temperature of the vacuum stone lifter will be too high in the use process. The reasons for this situation are as follows: 1. There are too many scales in the cooling system and the cooling eff…
-
Rules for maintenance of vacuum stone liftersTime:2019-10-29 15:13:021. Clean up dust, oil and sundries regularly. 2. Check whether the fire extinguisher is empty or complete regularly and replace it regularly. 3. Check whether the brake is sensitive and reliabl…
-
Three Steps of vacuum stone lifter OperationTime:2019-10-29 15:12:14
-
Technical Improvement of vacuum stone lifterTime:2019-10-29 15:11:13
-
Preparations for vacuum stone lifter operationTime:2019-10-29 15:10:09In order to prevent wire rope overload, the following measures should be taken:
-
The Load of vacuum stone lifterTime:2019-10-29 15:07:56
-
Daily Inspection of Eight General Parts of vacuum stone lifterTime:2019-10-29 15:07:01Daily Inspection of Eight General Parts of vacuum stone lifter (1) Hook Check whether the marking and anti-stripping device of the hook meets the requirements, whether the hook has cracks, cracks and other defe…
-
Reasons for price fluctuation of vacuum stone lifterTime:2019-10-29 15:06:132. The operation handles used as hydraulic pressure in the line crane are usually placed in the position of the center of the body after the suspension of operation. Together, we should ensure the flexibility and reliab…
-
What details should be paid attention to in the construction of vacuum stone lifter?Time:2019-10-29 15:04:581. The manufacturers of vacuum stone lifters should carry out no-load and load inspection before construction. Once abnormal conditions are found, they need to deal with them in time before they can be put into work. …
-
What are the daily checkpoints of the vacuum stone lifter driver?Time:2019-10-29 15:03:321) While inspecting the metal structure, special attention should be paid to the high-strength bolts. The connecting surface of the bolts should be cleaned up of dust, paint, stain and rust, and tightened with a torque …