Precautions for operation of remote control bridge crane
Keyword:bridge crane Time:2018-11-29 13:03:46
Precautions for operation of remote control bridge crane
If the bridge crane driver is better and easier to operate the crane, the driver can learn the technology of the remote control bridge crane. The important factor for the crane to run and drive is the driver. If the driver is skilled, the crane work can be carried out more easily and twice the effort.
The following is the bridge crane components.
Overhead Crane or bridge crane Drivers Responsibilities
The driver takes care of his safety and anyone works in the crane field.
Report any problems of the crane immediately for repair.
Check table before starting
Before connecting the main switch
Ensure that the main switch is disconnected and put the label on it.
To ensure smooth bridge deck and check whether crane has loose material.
Check to ensure that the hoist rope is positioned correctly on the drum and pulley. When the hook block is completely lowered, ensure that the drum has at least 2 turns of lifting rope.
Report immediately to your supervisor if there are obvious problems with the machine.
In doing these checks, when everything is in control, turn on the main isolator, delete your label, and press the start button.
Check table after opening
After switching on power
Full current limit switch tripped.
All current limit switches are running normally. Please inform your supervisor if you have any questions.
Brake test
Lifting Hazard
Keep your fingers clear when you lift it
Don't stand under loads
Make sure the hook is directly above the load.
Safe Operation of bridge Crane
When carrying, catching up and swaying loads, it can not generate swing motion on the load.
Parking the bridge Crane
Parking at the place of establishment
The loaded cargo must pass the hook
Even press the stop button
Cut off the power on the main isolation switch.
When Lifting Flat Products
Using Eyebolts
When Lifting Long and Loose Bundle
Some General Visual Signals
Inspection of Slings
Some General Information
Using of Lifting Chain
Abuse to Be Avoided
Summary- Operating Procedure
Everyone nearby has no load and realizes that the load is moving.
Gently pull up and let the bridge crane machine relax and relax.
Take care of the slow pace when controlling the operation.
"Catch up" and "catch" the swinging load.
Even in a short time, don't let the hanging load be left unattended.
You can't stand under the load.
Use the hook center when lifting the load.
Direct discharge hook above the load center
The hook can not be put on the ground or on the load.
When the load is driving, speed up and brake lightly.
Travel as close to the ground as possible and keep the speed to a minimum.
There is a clear view of load, tracker and work area.
Work only in a well lit area.
Walk in the back and next to the load. You can't hold the sling with the palm of your hand, but guide the load
The suspended load can not be arranged at will.
Reduce the load and unload the hoist from the hook.
2.5 meters is the safety height of the lifting hook
Properly store all sling and other lifting devices from load.
After you use bridge crane, you must switch the remote unit and place it in a safe or specified location.
- No information
-
1. Design objective of electronic crane scale network management. (1) Adopt advanced distributed data processing techno…
-
Electronic crane scale bearing platform installation to focus Electronic crane scale can be installed generally on the li…